Adafruit Ultimate GPS GNSS with USB - 99 channel w/10 Hz updates

The Ultimate GPS module you know and love has a glow-up to let it be easily used with any computer, not just microcontrollers! With the built-in USB-to-Serial converter, you can now plug-n-play the Ultimate GPS into your computer, laptop, embedded Linux computer, and more.

VIN
Power input for the GPS breakout, source states connect to a clean 3-5VDC supply.
Type · powerVoltage · 3-5VDC input
GND
Power and signal ground, connect to power supply and microcontroller ground.
Type · groundVoltage · 0V
VBAT
Optional RTC battery-backup input for the GPS real time clock battery backup.
Type · powerVoltage · Under 3.3V battery input per source note
EN
Enable pin pulled high with 10K; pulling to ground turns off the GPS module.
Type · control
3.3V
Output from the onboard 3.3V regulator, source states it can provide at least 100mA.
Type · powerVoltage · 3.3V output, at least 100mA

Start wiring

UART · 3-5VDC input · 0V

Verify supply voltage and logic levels before powering up.

Module pins: VIN, VBAT, 3.3V, GND, TX, RX. Schematik maps them to your board in the app.

Related groups

4 groups

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts

Temp and humidity

DHT11, DHT22/AM2302, and DHT20/AHT20 sensors solve the same broad job, but only some are acceptable substitutes in the same circuit.

Sensors · Environment sensors · 19 parts

Environment sensors

Choose between temperature-only, temperature/humidity, pressure and indoor air-quality modules without treating every environmental sensor as a drop-in substitute.

Sensors · Environment sensors · 8 parts

Light and colour

Photoresistors and color sensors both respond to light, but they expose very different signals and are not sensible drop-in substitutes.

Sensors · Light & color sensors · 7 parts