Adafruit NeoPixel Pebble / Seed LED Strand - 100 LEDs - 4" Pitch

We have all sorts of LED strips for a wide range of needs. Chonky strips? We got those! Strips with alligator clips that are easy-peasy to MakeCode? Oh definitely. Weatherproof? We have a gamut of options.And here's a new variation, a treasure trove of glowing pe

GNDwire closest to green dot
Ground wire. Adafruit product page states the wire closest to the green dot at the end of the strand is ground.
Type · ground
5Vopposite side from green-dot ground wire
5 V DC power wire. Adafruit product page states the wire on the opposite side from the green-dot ground wire is power and that the strand must use a 5 V DC power supply.
Type · powerVoltage · 5V DC
DINcentre line
NeoPixel data input. Adafruit product page states the centre line is data in and explains the green dot direction/input-pixel orientation.
Type · signalVoltage · 5V NeoPixel data signalling expected with 5V strand supply

Pin	Position	Type	Function

Start wiring

I2S · 5V DC · 5V NeoPixel data signalling expected with 5V strand supply

Verify supply voltage and logic levels before powering up.

Module pins: 5V, GND, DIN. Schematik maps them to your board in the app.

Related groups

4 groups

Displays

Character LCDs, SPI TFTs, e-paper modules and larger capacitive-touch TFT panels solve different display jobs. Treat display class, interface, controller, resolution, touch, refresh behaviour, storage, voltage and mounting as separate swap checks.

Displays · TFT & LCD displays · 35 parts

Connectors

Sort passive connector adapters from Qwiic boards, LCD modules and microSD card adapters before assuming anything with the right plug will substitute safely.

Connectors & cables · Connectors · 28 parts

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts

MCUs and boards

ESP32, Arduino Uno, Raspberry Pi Pico, and compatible add-on boards for running builds.

Boards · Microcontroller boards · 29 parts

GND	wire closest to green dot	ground	Ground wire. Adafruit product page states the wire closest to the green dot at the end of the strand is ground.
5V	opposite side from green-dot ground wire	power	5 V DC power wire. Adafruit product page states the wire on the opposite side from the green-dot ground wire is power and that the strand must use a 5 V DC power supply.	5V DC
DIN	centre line	signal	NeoPixel data input. Adafruit product page states the centre line is data in and explains the green dot direction/input-pixel orientation.	5V NeoPixel data signalling expected with 5V strand supply

Pinout

Start wiring

Displays

Connectors

Air quality

MCUs and boards