ESP-32S Wi-Fi & Bluetooth Combo Module

ESP-32S Wi-Fi & Bluetooth Combo Module — Seeed Studio — 2706

Dual-core Xtensa LX6 SoC module with 802.11b/g/n Wi-Fi and Bluetooth 4.2/BLE, 520 KB SRAM. Castellated/SMD footprint for direct PCB mounting. Discontinued; check stock before designing in.

Pinout

Logical pinout · physical placement not verified

Pins 1–40

ESP-32S WI-FI & BLUETO3V3GPIO17GNDGPIO18ENGPIO19GPIO0GPIO20GPIO1GPIO21GPIO2GPIO22GPIO3GPIO23GPIO4GPIO24GPIO5GPIO25GPIO6GPIO26GPIO7GPIO27GPIO8GPIO28GPIO9GPIO29GPIO10GPIO30GPIO11GPIO31GPIO12GPIO32GPIO13GPIO33GPIO14GPIO34GPIO15GPIO35GPIO16GPIO36

Pins 41–43

ESP-32S WI-FI & BLUETOGPIO37GPIO39GPIO38

One grouped source record is expanded into separate logical pads where unambiguous; physical placement is not implied.

  • 3V3
    Type · Power
  • GND
    Type · Ground
  • EN
    Type · Control
  • GPIO0–GPIO39
    Type · Signal

Start wiring

UART · SPI · 3.3 V · 5 V · Breakout

Seeed describes MDBT50Q-1M and MDBT50Q-P1M as Bluetooth 5.0 / BLE modules based on Nordic nRF52840, with GPIO, SPI, UART, I2C, I2S, PWM, …

Module pins: 3V3, GND, GPIO0–GPIO39. Schematik maps them to your board in the app.

Bluetooth

70 other options

BLE 5-era modules (nRF52840, MDBT50Q), XIAO MG24 boards with Matter-over-Thread, Bluefruit UART/SPI bridges, HM-11 serial modules, and BLE sniffers cover different jobs and different hosts.

View all 70

Related groups

4 groups