DockerPi IoT Node (A)

DockerPi IoT Node (A) — Seeed Studio — 4095

Raspberry Pi add-on combining GPS/BDS, GSM, and LoRa on a single I2C-controlled board. LoRa is accessed directly over I2C; GSM/GPS/BDS are controlled via an SC16IS752 UART bridge. Requires I2C support on the host board.

Pinout

Logical pinout · physical placement not verified
DOCKERPI IOT NODE (A)5VGPIO2SDAGNDGPIO3SCL
  • 5V
    Type · Power
  • GND
    Type · Ground
  • GPIO2SDA
    Type · GPIO, I2C
  • GPIO3SCL
    Type · GPIO, I2C

Start wiring

UART · I2C · USB · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: 5V, GND, GPIO2/SDA, GPIO3/SCL. Schematik maps them to your board in the app.

GNSS & GPS

67 other options

Adafruit Ultimate GPS (PA1616S/PA1616D), NEO-6M and NEO-M9N u-blox breakouts, Gravity GNSS BeiDou boards with I2C/UART, and 4G or LoRa RTK kits — accuracy and constellation requirements split them.

View all 67

Related groups

4 groups