DotStar Addressable 5050 Warm White LED w/Integrated Driver Chip

DotStar Addressable 5050 Warm White LED w/Integrated Driver Chip — Adafruit — 2350

5050 warm-white LED with integrated APA102-compatible DotStar driver; 24-bit PWM control over a 2-wire SPI interface (data + clock). Chainable; no external resistors needed. Brighter and more uniform than mixing RGB to white.

Pinout

Logical pinout · physical placement not verified
DOTSTAR ADDRESSABLE 50SDIVCCCKICKOGNDSDO
  • SDI1

    Data input for the SK9822/DotStar LED package. Datasheet pin table lists pin 1 SDI as control signal input data.

    Type · Signal
  • CKI2

    Clock input for the SK9822/DotStar LED package. Datasheet pin table lists pin 2 CKI as control signal input clock data.

    Type · Signal
  • GND3

    Signal and power-supply ground. Datasheet pin table lists pin 3 GND.

    Type · Ground
  • VCC4

    5 V power supply pin for the LED package. Datasheet pin table lists pin 4 VCC as power supply pin and the description states 5V application.

    Type · PowerVoltage · 5V
  • CKO5

    Clock output for cascading to the next LED. Datasheet pin table lists pin 5 CKO as control signal output clock data.

    Type · Signal
  • SDO6

    Data output for cascading to the next LED. Datasheet pin table lists pin 6 SDO as control signal output data.

    Type · Signal

LED pixels

179 other options

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

View all 179

Related groups

4 groups