Freematics OBD-II Emulator with J1850 PWM

Freematics OBD-II Emulator with J1850 PWM — Freematics — TEL0100

Miniature OBD-II emulator adding J1850 PWM protocol support alongside standard diagnostic protocols. Connects via USB and BLE; smallest form factor in the Freematics emulator range.

Pinout

Logical pinout · physical placement not verified
FREEMATICS OBD-II EMULOBD pin 16J1850+OBD pin 45J1850-CAN-HK-LineCAN-L
  • OBD pin 16
    Type · Power
  • OBD pin 45
    Type · Ground
  • CAN-H
    Type · Signal
  • CAN-L
    Type · Signal
  • J1850+
    Type · Signal
  • J1850-
    Type · Signal
  • K-Line
    Type · Signal

Start wiring

UART · SPI · 3.3 V · 5 V · Breakout

Seeed describes MDBT50Q-1M and MDBT50Q-P1M as Bluetooth 5.0 / BLE modules based on Nordic nRF52840, with GPIO, SPI, UART, I2C, I2S, PWM, …

Module pins: OBD pin 16, OBD pin 4/5, CAN-H, CAN-L, J1850+, J1850-, K-Line. Schematik maps them to your board in the app.

Bluetooth

70 other options

BLE 5-era modules (nRF52840, MDBT50Q), XIAO MG24 boards with Matter-over-Thread, Bluefruit UART/SPI bridges, HM-11 serial modules, and BLE sniffers cover different jobs and different hosts.

View all 70

Related groups

4 groups