Adafruit NeoPixel LED Outdoor Netting - 80x20 LEDs - 1x4 Meter

1,600-LED (80×20) outdoor-rated NeoPixel netting, 1×4 m, driven from a single data pin via WS2812B protocol. Weatherproof construction removes the need to assemble multiple strips for large grid displays.

Logical pinout · physical placement not verified

12V
Positive power input for the outdoor NeoPixel netting. The Adafruit product page says to power it with 12V.
Type · PowerVoltage · 12V power per Adafruit product page
GND
Ground / negative supply return for the NeoPixel netting and controller reference, matching the NeoPixel Überguide common-ground wiring requirement.
Type · GroundVoltage · 0V reference
DINDI
NeoPixel/SK6812/WS2812 data input. The Adafruit product page says signal input uses classic SK6812/WS2812/NeoPixel data, with 5V logic level recommended.
Type · SignalVoltage · 5V logic level recommended; 3.3V may work but is not recommended by Adafruit

Pin	Type	Function	Voltage
12V	Power	Positive power input for the outdoor NeoPixel netting. The Adafruit product page says to power it with 12V.	12V power per Adafruit product page
GND	Ground	Ground / negative supply return for the NeoPixel netting and controller reference, matching the NeoPixel Überguide common-ground wiring requirement.	0V reference
DINDI	Signal	NeoPixel/SK6812/WS2812 data input. The Adafruit product page says signal input uses classic SK6812/WS2812/NeoPixel data, with 5V logic level recommended.	5V logic level recommended; 3.3V may work but is not recommended by Adafruit

Logical pinout · physical placement not verified

Pin details

3 connections

12V
Positive power input for the outdoor NeoPixel netting. The Adafruit product page says to power it with 12V.
PowerVoltage · 12V power per Adafruit product page
GND
Ground / negative supply return for the NeoPixel netting and controller reference, matching the NeoPixel Überguide common-ground wiring requirement.
GroundVoltage · 0V reference
DINDI
NeoPixel/SK6812/WS2812 data input. The Adafruit product page says signal input uses classic SK6812/WS2812/NeoPixel data, with 5V logic level recommended.
SignalVoltage · 5V logic level recommended; 3.3V may work but is not recommended by Adafruit

LED pixels

179 other options

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

View all 179

Related groups

4 groups

Bare ICs

74HC logic gates, MCP3008/MCP23017 ADCs and expanders, 24LC256 EEPROM, 4N25-series optocouplers and ULN2803A drivers — bare DIP chips with no breakout-board conveniences like pull-ups or level shifting.

Components · Integrated circuits · 68 parts

Converters

ADS1115/MCP3421 ADCs, MCP4725 and GP8413 DACs, CP2102 USB-UART boards, and I2C plumbing like the LTC4316 address shifter — matched to bus, resolution and signal range.

Components · Interface converters · 114 parts

Memory

24LC32/25LC256 EEPROM, I2C FRAM, 64Mbit PSRAM, and microSD breakouts up to 64GB — matched to write frequency and data volume, not just interface.

Components · Memory & storage · 39 parts

Passives

E12 resistor kits, ceramic and electrolytic capacitor sets, 1N4148/1N4007 diodes, TIP120 Darlingtons, IRLZ44N MOSFETs and 100F supercapacitors — bench stock in kit quantities.

Components · Passives · 58 parts