NeoPixel Stick - 8 x 5050 RGB LED with Integrated Drivers

NeoPixel Stick - 8 x 5050 RGB LED with Integrated Drivers — Adafruit — 1426

PCB stick with 8 chainable WS2812-compatible 5050 RGB LEDs; each LED has an integrated driver at ~18mA constant current per channel. Powered at 5V (4–7V).

Pinout

Logical pinout · physical placement not verified
NEOPIXEL STICK - 8 X 55V+DINDIGND-DOUTDO
  • 5V+

    NeoPixel Stick power input. Adafruit product page says power the stick with 5VDC, 4-7V works.

    Type · PowerVoltage · 5VDC nominal, 4-7V stated by Adafruit product page.
  • GND-

    NeoPixel Stick ground / supply return. NeoPixel guide states GND connects to power supply ground and controller ground.

    Type · GroundVoltage · 0V / ground.
  • DINDI

    NeoPixel data input at the input end. Adafruit guide states pads may be labelled DIN or DI and data input can originate from a microcontroller digital pin.

    Type · Signal
  • DOUTDO

    NeoPixel data output at the end of the chain. Adafruit guide states DOUT/DO can be left unconnected or connected to the next chain input.

    Type · Signal

LED pixels

179 other options

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

View all 179

Related groups

4 groups