nOOds - Flexible LED Filament - 24V 1.2m long - Lime Green

Flexible lime-green LED filament, 1.2 m long, operating at 24 V. Analog (non-addressable); use a current-limiting resistor or constant-current driver.

Logical pinout · physical placement not verified

Anodemetal end with small hole
Positive LED filament terminal. Adafruit says to power with 24V at both ends, recommends current limiting to max 500mA, and says the anode is the metal end with a little hole in it. Technical table lists 24V:850mA and 22V:370mA.
Type · PowerVoltage · 24V
Cathodeopposite end
Other LED filament terminal. Reverse the two ends if it does not light immediately; source describes it as a two-end LED filament.
Type · GroundVoltage · 0V return

Pin	Position	Type	Function	Voltage
Anode	metal end with small hole	Power	Positive LED filament terminal. Adafruit says to power with 24V at both ends, recommends current limiting to max 500mA, and says the anode is the metal end with a little hole in it. Technical table lists 24V:850mA and 22V:370mA.	24V
Cathode	opposite end	Ground	Other LED filament terminal. Reverse the two ends if it does not light immediately; source describes it as a two-end LED filament.	0V return

Logical pinout · physical placement not verified

Pin details

2 connections

Anode
Positive LED filament terminal. Adafruit says to power with 24V at both ends, recommends current limiting to max 500mA, and says the anode is the metal end with a little hole in it. Technical table lists 24V:850mA and 22V:370mA.
PowerVoltage · 24V
metal end with small hole
Cathode
Other LED filament terminal. Reverse the two ends if it does not light immediately; source describes it as a two-end LED filament.
GroundVoltage · 0V return
opposite end

LED pixels

179 other options

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

View all 179

Related groups

4 groups

Bare ICs

74HC logic gates, MCP3008/MCP23017 ADCs and expanders, 24LC256 EEPROM, 4N25-series optocouplers and ULN2803A drivers — bare DIP chips with no breakout-board conveniences like pull-ups or level shifting.

Components · Integrated circuits · 68 parts

Converters

ADS1115/MCP3421 ADCs, MCP4725 and GP8413 DACs, CP2102 USB-UART boards, and I2C plumbing like the LTC4316 address shifter — matched to bus, resolution and signal range.

Components · Interface converters · 114 parts

Memory

24LC32/25LC256 EEPROM, I2C FRAM, 64Mbit PSRAM, and microSD breakouts up to 64GB — matched to write frequency and data volume, not just interface.

Components · Memory & storage · 39 parts

Passives

E12 resistor kits, ceramic and electrolytic capacitor sets, 1N4148/1N4007 diodes, TIP120 Darlingtons, IRLZ44N MOSFETs and 100F supercapacitors — bench stock in kit quantities.

Components · Passives · 58 parts