Ultra Bright 4W Chainable RGBW NeoPixel LED - Warm White

Single chainable 4 W RGBW NeoPixel LED with an additional warm-white channel for high-output applications. Uses the standard NeoPixel single-wire protocol at 5 V.

Logical pinout · physical placement not verified

+5V
NeoPixel power input; Adafruit NeoPixel guide says inputs correspond to +5V, ground, and data.
Type · PowerVoltage · 5V nominal; guide notes 5V DC supply and 3.7V LiPoly direct use for some NeoPixels
GND
Ground/minus connection; guide says ground must be common with the controller and power supply.
Type · GroundVoltage · 0V
DINDI
Data input at the input end of the NeoPixel chain.
Type · SignalVoltage · 5V data preferred when powered from 5V; 3.3V data acceptable for 3.7V LiPoly use per guide
DOUTDO
Data output for chaining to the next NeoPixel input; can be left unconnected at the end of a chain.
Type · Signal

Pin	Type	Function	Voltage
+5V	Power	NeoPixel power input; Adafruit NeoPixel guide says inputs correspond to +5V, ground, and data.	5V nominal; guide notes 5V DC supply and 3.7V LiPoly direct use for some NeoPixels
GND	Ground	Ground/minus connection; guide says ground must be common with the controller and power supply.	0V
DINDI	Signal	Data input at the input end of the NeoPixel chain.	5V data preferred when powered from 5V; 3.3V data acceptable for 3.7V LiPoly use per guide
DOUTDO	Signal	Data output for chaining to the next NeoPixel input; can be left unconnected at the end of a chain.

Logical pinout · physical placement not verified

Pin details

4 connections

+5V
NeoPixel power input; Adafruit NeoPixel guide says inputs correspond to +5V, ground, and data.
PowerVoltage · 5V nominal; guide notes 5V DC supply and 3.7V LiPoly direct use for some NeoPixels
GND
Ground/minus connection; guide says ground must be common with the controller and power supply.
GroundVoltage · 0V
DINDI
Data input at the input end of the NeoPixel chain.
SignalVoltage · 5V data preferred when powered from 5V; 3.3V data acceptable for 3.7V LiPoly use per guide
DOUTDO
Data output for chaining to the next NeoPixel input; can be left unconnected at the end of a chain.
Signal

LED pixels

179 other options

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

View all 179

Related groups

4 groups

Bare ICs

74HC logic gates, MCP3008/MCP23017 ADCs and expanders, 24LC256 EEPROM, 4N25-series optocouplers and ULN2803A drivers — bare DIP chips with no breakout-board conveniences like pull-ups or level shifting.

Components · Integrated circuits · 68 parts

Converters

ADS1115/MCP3421 ADCs, MCP4725 and GP8413 DACs, CP2102 USB-UART boards, and I2C plumbing like the LTC4316 address shifter — matched to bus, resolution and signal range.

Components · Interface converters · 114 parts

Memory

24LC32/25LC256 EEPROM, I2C FRAM, 64Mbit PSRAM, and microSD breakouts up to 64GB — matched to write frequency and data volume, not just interface.

Components · Memory & storage · 39 parts

Passives

E12 resistor kits, ceramic and electrolytic capacitor sets, 1N4148/1N4007 diodes, TIP120 Darlingtons, IRLZ44N MOSFETs and 100F supercapacitors — bench stock in kit quantities.

Components · Passives · 58 parts