Adafruit 1.54" 240x240 Wide Angle TFT LCD Display with MicroSD - ST7789 with EYESPI Connector
We've been looking for a display like this for a long time - it's only 1.5" diagonal but has a high density 220 ppi, 240x240 pixel display with full-angle viewing.
Pinout
- VCCType · Power
- GNDType · Ground
- DINType · Signal
- CLKType · Control
- CSType · SPI
- DCType · Control
- RSTType · Control
- BLType · Control
- MISOType · SPI
- SDCSType · Control
| Pin | Type |
|---|---|
| VCC | Power |
| GND | Ground |
| DIN | Signal |
| CLK | Control |
| CS | SPI |
| DC | Control |
| RST | Control |
| BL | Control |
| MISO | SPI |
| SDCS | Control |
Pin details
10 connections- VCCPower
- GNDGround
- DINSignal
- CLKControl
- CSSPI
- DCControl
- RSTControl
- BLControl
- MISOSPI
- SDCSControl
Start wiring
SPI · I2C · 3.3 V · 3.3 – 5 V · Breakout
Adafruit describes product 398 as a 16x2 RGB backlight LCD using digital pins for LCD control and PWM pins for the backlight; the product…
Module pins: VCC, GND, DIN, CLK, MISO. Schematik maps them to your board in the app.
TFT & LCD
189 other options16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.
0.71" Round LCD Display Module - 160x160, SPI, 65K Colors visual preview0.71" Round LCD Display Module - 160x160, SPI, 65K Colors
0.71inch Double Eye Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K Colors visual preview0.71inch Double Eye Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K Colors
0.96" IPS LCD Display Module - 160x80, SPI visual preview0.96" IPS LCD Display Module - 160x80, SPI
1.28inch Round Touch LCD Module, 240×240, IPS, SPI/I2C visual preview1.28inch Round Touch LCD Module, 240×240, IPS, SPI/I2C
1.3" SPI Colour Square LCD (240x240) Breakout visual preview1.3" SPI Colour Square LCD (240x240) Breakout
1.3inch LCD Module, 240×240, IPS, SPI visual preview1.3inch LCD Module, 240×240, IPS, SPI
1.44inch LCD HAT for Raspberry Pi, 128×128, SPI visual preview1.44inch LCD HAT for Raspberry Pi, 128×128, SPI
1.54inch LCD Module, 240×240, IPS, 65K RGB, SPI visual preview1.54inch LCD Module, 240×240, IPS, 65K RGB, SPI
1.54inch Touch LCD Module, 240×240, IPS, SPI/I2C visual preview1.54inch Touch LCD Module, 240×240, IPS, SPI/I2C
1.5inch LCD Module, 240×280, IPS, Rounded, SPI visual preview1.5inch LCD Module, 240×280, IPS, Rounded, SPI
1.8" TFT LCD 160x128 RGB visual preview1.8" TFT LCD 160x128 RGB
$2.95
1.83inch Touch LCD Module, 240×284, IPS, SPI/I2C visual preview1.83inch Touch LCD Module, 240×284, IPS, SPI/I2C
Related groups
4 groups
1.02" E-Ink Display Module - 128x80, Black/White, SPI visual previewE-paper
Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.
Displays · E-paper displays · 101 parts
"Shake" 8x8 LED Matrix visual previewLED displays
Adafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.
Displays · LED displays · 89 parts
0.49inch OLED Display Module, 64×32, I2C visual previewOLED
About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.
Displays · OLED displays · 30 parts
1.75mm PLA (1kg) - Black visual preview3D printing
DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts