Raspberry Pi GPS Module

Raspberry Pi GPS Module — Seeed Studio — 2731

USB GPS module using a CP2102 USB-to-UART bridge, presenting as a serial COM port to the host. Outputs standard NMEA sentences; plug-and-play with Raspberry Pi and any host with a USB port.

Pinout

Logical pinout · physical placement not verified
RASPBERRY PI GPS MODUL5VGPIO15RXDGNDGPIO4GPIO14TXD
  • 5V
    Type · Power
  • GND
    Type · Ground
  • GPIO14TXD
    Type · GPIO, UART
  • GPIO15RXD
    Type · GPIO, UART
  • GPIO4
    Type · GPIO

Start wiring

UART · I2C · USB · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: 5V, GND, GPIO14/TXD, GPIO15/RXD, GPIO4. Schematik maps them to your board in the app.

GNSS & GPS

67 other options

Adafruit Ultimate GPS (PA1616S/PA1616D), NEO-6M and NEO-M9N u-blox breakouts, Gravity GNSS BeiDou boards with I2C/UART, and 4G or LoRa RTK kits — accuracy and constellation requirements split them.

View all 67

Related groups

4 groups