2.8" TFT Touch Shield
2.8" TFT touchscreen Arduino shield from Seeed Studio. Refer to the product page for resolution, controller, and interface details.
Pinout
- D2Type · GPIO
- D3Type · GPIO
- D4Type · GPIO
- D5Type · GPIO
- D6Type · GPIO
- D7Type · GPIO
- D8Type · GPIO
- D9Type · GPIO
- D10Type · GPIO
- D11Type · GPIO
- D12Type · GPIO
- D13Type · GPIO
- D14 (A0)Type · Signal
- D15 (A1)Type · Signal
- D16 (A2)Type · Signal
- D17 (A3)Type · Signal
- 5VType · Power
- GNDType · Ground
- 3.3VType · Power
| Pin | Type |
|---|---|
| D2 | GPIO |
| D3 | GPIO |
| D4 | GPIO |
| D5 | GPIO |
| D6 | GPIO |
| D7 | GPIO |
| D8 | GPIO |
| D9 | GPIO |
| D10 | GPIO |
| D11 | GPIO |
| D12 | GPIO |
| D13 | GPIO |
| D14 (A0) | Signal |
| D15 (A1) | Signal |
| D16 (A2) | Signal |
| D17 (A3) | Signal |
| 5V | Power |
| GND | Ground |
| 3.3V | Power |
Pin details
19 connections- D2GPIO
- D3GPIO
- D4GPIO
- D5GPIO
- D6GPIO
- D7GPIO
- D8GPIO
- D9GPIO
- D10GPIO
- D11GPIO
- D12GPIO
- D13GPIO
- D14 (A0)Signal
- D15 (A1)Signal
- D16 (A2)Signal
- D17 (A3)Signal
- 5VPower
- GNDGround
- 3.3VPower
Start wiring
SPI · I2C · 3.3 V · 3.3 – 5 V · Breakout
Adafruit describes product 398 as a 16x2 RGB backlight LCD using digital pins for LCD control and PWM pins for the backlight; the product…
Module pins: 5V, 3.3V, GND, D2, D3, D4, D5, D6. Schematik maps them to your board in the app.
TFT & LCD
189 other options16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.
0.71" Round LCD Display Module - 160x160, SPI, 65K Colors visual preview0.71" Round LCD Display Module - 160x160, SPI, 65K Colors
0.71inch Double Eye Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K Colors visual preview0.71inch Double Eye Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K Colors
0.96" IPS LCD Display Module - 160x80, SPI visual preview0.96" IPS LCD Display Module - 160x80, SPI
1.28inch Round Touch LCD Module, 240×240, IPS, SPI/I2C visual preview1.28inch Round Touch LCD Module, 240×240, IPS, SPI/I2C
1.3" SPI Colour Square LCD (240x240) Breakout visual preview1.3" SPI Colour Square LCD (240x240) Breakout
1.3inch LCD Module, 240×240, IPS, SPI visual preview1.3inch LCD Module, 240×240, IPS, SPI
1.44inch LCD HAT for Raspberry Pi, 128×128, SPI visual preview1.44inch LCD HAT for Raspberry Pi, 128×128, SPI
1.54inch LCD Module, 240×240, IPS, 65K RGB, SPI visual preview1.54inch LCD Module, 240×240, IPS, 65K RGB, SPI
1.54inch Touch LCD Module, 240×240, IPS, SPI/I2C visual preview1.54inch Touch LCD Module, 240×240, IPS, SPI/I2C
1.5inch LCD Module, 240×280, IPS, Rounded, SPI visual preview1.5inch LCD Module, 240×280, IPS, Rounded, SPI
1.8" TFT LCD 160x128 RGB visual preview1.8" TFT LCD 160x128 RGB
$2.95
1.83inch Touch LCD Module, 240×284, IPS, SPI/I2C visual preview1.83inch Touch LCD Module, 240×284, IPS, SPI/I2C
Related groups
4 groups
1.02" E-Ink Display Module - 128x80, Black/White, SPI visual previewE-paper
Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.
Displays · E-paper displays · 101 parts
"Shake" 8x8 LED Matrix visual previewLED displays
Adafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.
Displays · LED displays · 89 parts
0.49inch OLED Display Module, 64×32, I2C visual previewOLED
About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.
Displays · OLED displays · 30 parts
1.75mm PLA (1kg) - Black visual preview3D printing
DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts