A7670E LTE Cat-1 HAT for Raspberry Pi

A7670E LTE Cat-1 HAT for Raspberry Pi — Waveshare — A7670E Cat-1 HAT

Raspberry Pi HAT based on A7670E module, supporting LTE Cat-1 and 2G GSM/GPRS with LBS positioning. Covers Europe, Southeast Asia, West Asia, Africa, China, and South Korea multi-band frequencies.

Pinout

Logical pinout · physical placement not verified
A7670E LTE CAT-1 HAT FVCCRXDGNDPWRKEYTXDRI
  • VCC

    Module or carrier-board supply; use the voltage required by the breakout and provide high peak current.

    Type · PowerVoltage · 5V
  • GND

    Common ground.

    Type · Ground
  • TXD

    Modem UART transmit to MCU RX.

    Type · UART
  • RXD

    Modem UART receive from MCU TX.

    Type · UART
  • PWRKEY

    Power-key input used by many A7670E boards.

    Type · GPIO
  • RI

    Ring indicator / event output where exposed.

    Type · GPIO

Start wiring

UART · USB · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: VCC, GND, TXD, RXD. Schematik maps them to your board in the app.

Cellular

57 other options

Adafruit FONA GSM breakouts, the Gravity Air780EU 4G Cat 1 module, Dragino NB-IoT Shield-B8, Pycom FiPy, Quectel and SIMCom M.2 5G modems, and the RockBLOCK 9603 Iridium modem each target a different network tier.

View all 57

Related groups

4 groups