Dragino NB-IoT Shield B8

Dragino NB-IoT Shield B8 — Dragino — 109030001

Arduino shield adding NB-IoT (Band 8) connectivity for low-power wide-area IoT applications. Uses AT commands over UART; supports deep-coverage deployments with battery life exceeding 10 years in typical use cases.

Pinout

Logical pinout · physical placement not verified
DRAGINO NB-IOT SHIELD 5VPWRKEYGNDRESETD0RXANTD1TX
  • 5V
    Type · Power
  • GND
    Type · Ground
  • D0RX
    Type · GPIO, UART
  • D1TX
    Type · GPIO, UART
  • PWRKEY
    Type · Control
  • RESET
    Type · Control
  • ANT
    Type · Signal

Start wiring

UART · USB · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: 5V, GND, D0/RX, D1/TX, ANT. Schematik maps them to your board in the app.

Cellular

57 other options

Adafruit FONA GSM breakouts, the Gravity Air780EU 4G Cat 1 module, Dragino NB-IoT Shield-B8, Pycom FiPy, Quectel and SIMCom M.2 5G modems, and the RockBLOCK 9603 Iridium modem each target a different network tier.

View all 57

Related groups

4 groups