Large Surface Transducer with Wires - 4 Ohm 5 Watt
45 mm diameter 4 Ω / 5 W surface transducer that vibrates any flat surface or large cup it is pressed against to produce sound. Pairs with a compatible audio amplifier.
Pinout
- Speaker lead 1
One of the two pre-soldered transducer coil leads; Adafruit says to connect it as you would any other speaker.
Type · audioVoltage · 4Ω impedance, about 5W recommended on the Adafruit product page. - Speaker lead 2
Other pre-soldered transducer coil lead for the speaker/transducer drive connection; polarity is not specified on the Adafruit product page.
Type · audioVoltage · 4Ω impedance, about 5W recommended on the Adafruit product page.
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| Speaker lead 1 | audio | One of the two pre-soldered transducer coil leads; Adafruit says to connect it as you would any other speaker. | 4Ω impedance, about 5W recommended on the Adafruit product page. | |
| Speaker lead 2 |
Start wiring
Analog · I2S · PWM · 3.3 – 5 V · Bare
Adafruit product 1536 is a breadboard-friendly active buzzer: apply 3–5 V DC and it produces a loud fixed tone around 2 kHz; the frequenc…
Buzzers & speakers
22 other optionsPassive speakers from 1 W to 20 W (4–8 Ω), piezo buzzers active and passive, bone-conductor and surface transducers, and a BOSON buzzer module — all need a matching driver circuit or amplifier.
Related groups
4 groups
Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger visual preview
Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger 16MB Flash visual preview
Adafruit Audio FX Sound Board - WAV/OGG Trigger visual preview
Adafruit Audio FX Sound Board - WAV/OGG Trigger with 2MB Flash visual previewAudio boards
Adafruit Audio FX boards and WAV Trigger for standalone playback, DFPlayer Pro and Gravity MP3 for MCU-scripted audio, EasyVR for speech recognition, Fermion/Gravity voice recorders, and Pi I2S DAC/codec boards.
Audio · Audio boards · 53 parts
Adafruit Electret Microphone Amplifier with Adjustable Gain visual preview
LM386 Sound Sensor visual preview
6+1 Microphone Array visual preview
Adafruit Electret Microphone Amplifier - MAX9814 w/ Auto Gain Control visual previewMicrophones
MAX4466 and MAX9814 electret preamp breakouts for analog audio, I2S MEMS mics (ICS-43434, SPH0645LM4H, INMP441) for digital audio, PDM breakouts, ReSpeaker arrays for far-field pickup, and an LM386 sound detector.
Audio · Microphones · 18 parts
3W Mini Audio Stereo Amplifier (W2) visual preview
Adafruit I2S 3W Class D Amplifier Breakout - MAX98357A visual preview
Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302 visual preview
Adafruit STEMMA Piezo Driver Amp - PAM8904 visual previewAmplifiers
MAX98357A and MAX98357 I2S class-D amps, PAM8403 and TPA2012 analog stereo amps, MAX9744 20W stereo amp, LM386 and PAM8302 mono amps, and discrete op-amp packs for signal-level work.
Audio · Audio amplifiers · 16 parts
1.75mm PLA (1kg) - Black visual preview
1.75mm PLA (1kg) - Gold visual preview
1.75mm PLA (1kg) - Green visual preview
1.75mm PLA (1kg) - Natural visual preview3D printing
DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts
