NeoPixel Jewel - 7 x 5050 RGBW LED w/ Integrated Drivers

Be the belle of the ball with the NeoPixel Jewel! These NeoPixel Jewels now have 4 LEDs in them (red, green, blue, and white) for excellent lighting effects.

5V
NeoPixel Jewel power input. Adafruit product page states to power the board with 5VDC and that 4-7V works.
Type · powerVoltage · 5VDC nominal; 4-7V supported by source
GND
Ground / negative return. Adafruit NeoPixel guide identifies the same three inputs as +5V, ground, and data, and connects GND to the controller/power ground.
Type · groundVoltage · 0V
DIN / DI
NeoPixel data input. Adafruit guide says the input end may be labelled DIN or DI, and the product page says a single data line controls the chain.
Type · signal
DOUT / data out
NeoPixel chain output from this Jewel to the input of another. Adafruit product page states the LEDs are chainable by connecting the output of one Jewel into the input of another.
Type · signal

Start wiring

I2S · 5VDC nominal; 4-7V supported by source · 0V

Confirm the data interface matches your host board.

Module pins: 5V, GND, DIN / DI, DOUT / data out. Schematik maps them to your board in the app.

Related groups

4 groups

Displays

Character LCDs, SPI TFTs, e-paper modules and larger capacitive-touch TFT panels solve different display jobs. Treat display class, interface, controller, resolution, touch, refresh behaviour, storage, voltage and mounting as separate swap checks.

Displays · TFT & LCD displays · 35 parts

Connectors

Sort passive connector adapters from Qwiic boards, LCD modules and microSD card adapters before assuming anything with the right plug will substitute safely.

Connectors & cables · Connectors · 28 parts

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts

MCUs and boards

ESP32, Arduino Uno, Raspberry Pi Pico, and compatible add-on boards for running builds.

Boards · Microcontroller boards · 24 parts

5V	power	NeoPixel Jewel power input. Adafruit product page states to power the board with 5VDC and that 4-7V works.	5VDC nominal; 4-7V supported by source
GND	ground	Ground / negative return. Adafruit NeoPixel guide identifies the same three inputs as +5V, ground, and data, and connects GND to the controller/power ground.	0V
DIN / DI	signal	NeoPixel data input. Adafruit guide says the input end may be labelled DIN or DI, and the product page says a single data line controls the chain.
DOUT / data out	signal	NeoPixel chain output from this Jewel to the input of another. Adafruit product page states the LEDs are chainable by connecting the output of one Jewel into the input of another.

Pinout

Start wiring

Displays

Connectors

Air quality

MCUs and boards