NeoPixel Jewel - 7 x 5050 RGBW LED w/ Integrated Drivers

Be the belle of the ball with the NeoPixel Jewel! These NeoPixel Jewels now have 4 LEDs in them (red, green, blue, and white) for excellent lighting effects.

5V
NeoPixel power input for the Jewel board; Adafruit product page says to power the board with 5VDC and the Überguide maps +5V to the NeoPixel positive supply input.
Type · powerVoltage · 5VDC typical; product page states 4-7V works
GND
Ground / minus return for NeoPixel power and controller reference; Überguide says GND/minus must connect to the supply minus and microcontroller GND.
Type · groundVoltage · 0V reference
DIN / DI
Data input to the first NeoPixel; Überguide identifies DIN or DI as data input and says it can originate from a microcontroller digital pin.
Type · signal
DOUT / DO
Data output for chaining; Adafruit product page says the LEDs are chainable by connecting the output of one Jewel to the input of another, and the Überguide says DOUT/DO at the end can be left unconnected or connected to the next chain input.
Type · signal

Start wiring

I2S · 5VDC typical; product page states 4-7V works · 0V reference

Verify supply voltage and logic levels before powering up.

Module pins: 5V, GND, DIN / DI, DOUT / DO. Schematik maps them to your board in the app.

Related groups

4 groups

Displays

Character LCDs, SPI TFTs, e-paper modules and larger capacitive-touch TFT panels solve different display jobs. Treat display class, interface, controller, resolution, touch, refresh behaviour, storage, voltage and mounting as separate swap checks.

Displays · TFT & LCD displays · 35 parts

Connectors

Sort passive connector adapters from Qwiic boards, LCD modules and microSD card adapters before assuming anything with the right plug will substitute safely.

Connectors & cables · Connectors · 28 parts

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts

MCUs and boards

ESP32, Arduino Uno, Raspberry Pi Pico, and compatible add-on boards for running builds.

Boards · Microcontroller boards · 24 parts

5V	power	NeoPixel power input for the Jewel board; Adafruit product page says to power the board with 5VDC and the Überguide maps +5V to the NeoPixel positive supply input.	5VDC typical; product page states 4-7V works
GND	ground	Ground / minus return for NeoPixel power and controller reference; Überguide says GND/minus must connect to the supply minus and microcontroller GND.	0V reference
DIN / DI	signal	Data input to the first NeoPixel; Überguide identifies DIN or DI as data input and says it can originate from a microcontroller digital pin.
DOUT / DO	signal	Data output for chaining; Adafruit product page says the LEDs are chainable by connecting the output of one Jewel to the input of another, and the Überguide says DOUT/DO at the end can be left unconnected or connected to the next chain input.

Pinout

Start wiring

Displays

Connectors

Air quality

MCUs and boards