Adafruit NeoPixel NeoMatrix - 64 RGBW - Natural
8x8 RGBW NeoPixel matrix with a dedicated natural white LED channel per pixel. 64 individually addressable pixels driven by a single data pin; draws up to ~3.5 A at full brightness.
Pinout
- +5V
Positive supply for the NeoPixel NeoMatrix; Adafruit product page says to provide 5VDC to the +5V pin on the input port.
Type · powerVoltage · 5V DC; product page notes up to about 3.5A per panel at full bright white and suggests 5V 2A for most use. - GND
Ground/common return; Adafruit says to connect ground and make a common ground between the 5V supply and microcontroller.
Type · groundVoltage · 0V - DIN
NeoPixel one-wire data input on the input port; Adafruit says to connect DIN to the microcontroller.
Type · data-inputVoltage · logic data input - DOUT
NeoPixel data output for chaining; Adafruit says the second panel DIN connects to the first panel DOUT.
Type · data-outputVoltage · logic data output
Start wiring
I2C · SPI · Single data line · 5 V · 3.3 – 5 V · Bare
Confirm the data interface matches your host board.
Module pins: +5V, GND, DIN, DOUT. Schematik maps them to your board in the app.
LED displays
87 other optionsAdafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.
Related groups
4 groups
RGB Backlight Positive LCD 16x2 visual preview
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic) visual preview
I2C 20x4 Arduino LCD Display Module visual preview
Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display V2.0 visual previewTFT & LCD
16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.
Displays · TFT & LCD displays · 187 parts
1.02" E-Ink Display Module - 128x80, Black/White, SPI visual preview
1.02" E-Ink Raw Display Panel - 128x80, Black/White, SPI visual preview
1.54inch e-Paper Module (B), 200×200, 3-Color, SPI visual preview
1.54inch e-Paper Module, 200×200, SPI visual previewE-paper
Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.
Displays · E-paper displays · 102 parts
0.49inch OLED Display Module, 64×32, I2C visual preview
0.91" OLED Display Module - 128x32, I2C visual preview
0.96" OLED (B) - SPI/I2C visual preview
0.96" RGB OLED Display Module - 64x128, SPI, 65K Colors visual previewOLED
About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.
Displays · OLED displays · 29 parts
1.75mm PLA (1kg) - Black visual preview
1.75mm PLA (1kg) - Gold visual preview
1.75mm PLA (1kg) - Green visual preview
1.75mm PLA (1kg) - Natural visual preview3D printing
DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts
