SparkFun STEMMA QT / Qwiic Breadboard Breakout Adapter

The SparkFun Qwiic Adapter can make any old I2C board or sensor a STEMMA QT / Qwiic-enabled one. This adapter breaks out the I2C pins from the JST SH connectors to pins that you can easily solder with your favorite I2C-enabled device.

SCL
I2C clock broken out from the JST SH Qwiic / STEMMA QT connectors to plated through holes; Adafruit product page states the board breaks out I2C pins and four through holes for SCL, SDA, 3.3V and GND.
Type · signalVoltage · 3.3 V I2C bus context from the same 3.3V breakout power rail; no separate level shifting claimed.
SDA
I2C data broken out from the JST SH Qwiic / STEMMA QT connectors to plated through holes; same I2C bus as the two JST SH ports.
Type · signalVoltage · 3.3 V I2C bus context from the same 3.3V breakout power rail; no separate level shifting claimed.
3.3V
3.3 V power rail broken out from the Qwiic / STEMMA QT connector bus to a plated through hole.
Type · powerVoltage · 3.3 V
GND
Ground rail broken out from the Qwiic / STEMMA QT connector bus to a plated through hole.
Type · groundVoltage · 0 V reference

Start wiring

I2C · 3.3 V I2C bus context from the same 3.3V breakout power rail; no separate level shifting claimed. · 3.3 V

Confirm the data interface matches your host board.

Module pins: 3.3V, GND, SCL, SDA. Schematik maps them to your board in the app.

Related groups

4 groups

Connectors

Sort passive connector adapters from Qwiic boards, LCD modules and microSD card adapters before assuming anything with the right plug will substitute safely.

Connectors & cables · Connectors · 28 parts

Displays

Character LCDs, SPI TFTs, e-paper modules and larger capacitive-touch TFT panels solve different display jobs. Treat display class, interface, controller, resolution, touch, refresh behaviour, storage, voltage and mounting as separate swap checks.

Displays · TFT & LCD displays · 35 parts

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts

MCUs and boards

ESP32, Arduino Uno, Raspberry Pi Pico, and compatible add-on boards for running builds.

Boards · Microcontroller boards · 29 parts