
Add motion, direction, and orientation sensing to your project with this all-in-one 9-DOF sensor that is STEMMA QT ready for easy plug-n-play usage.
Power input to the breakout. Adafruit Learn states the onboard regulator accepts 3-5VDC and safely converts it down for the 3V sensor.
3.3V output from the voltage regulator. Adafruit states up to 100mA can be drawn from this pin.
Common ground for power and logic.
I2C clock pin. Also used as SPI clock. Adafruit states it is level shifted for 3-5V logic and has a 10K pullup.
I2C data pin. Also used as SPI MOSI. Adafruit states it is level shifted for 3-5V logic and has a 10K pullup.
I2C · SPI · 3-5VDC input · 3.3V output, up to 100mA
Confirm the data interface matches your host board.
Module pins: Vin, 3V3, GND, SCL, SDA, CSAG, CSM, SDOAG. Schematik maps them to your board in the app.
SparkFun Qwiic Pro Micro BoogieBoard visual preview
9V to Barrel Jack Adapter visual preview
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic) visual preview
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter | Kiwi Electronics visual previewSort passive connector adapters from Qwiic boards, LCD modules and microSD card adapters before assuming anything with the right plug will substitute safely.
Connectors & cables · Connectors · 28 parts
RGB backlight positive LCD 16x2 visual preview
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic) visual preview
I2C 20x4 Arduino LCD Display Module visual preview
Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display V2.0 visual previewCharacter LCDs, SPI TFTs, e-paper modules and larger capacitive-touch TFT panels solve different display jobs. Treat display class, interface, controller, resolution, touch, refresh behaviour, storage, voltage and mounting as separate swap checks.
Displays · TFT & LCD displays · 35 parts
MQ-2 Gas Sensor visual preview
MQ-3 Gas Sensor visual preview
MQ-135 Gas Sensor visual preview
Grove - Air quality sensor visual previewChoose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.
Sensors · Gas & air-quality sensors · 31 parts
Arduino Uno visual preview
Raspberry Pi Pico visual preview
Adafruit Feather nRF52840 Express visual preview
Pan-Tilt HAT kit visual previewESP32, Arduino Uno, Raspberry Pi Pico, and compatible add-on boards for running builds.
Boards · Microcontroller boards · 24 parts
Accelerometer and gyro subchip SPI chip select. Adafruit states it is level shifted for 3-5V logic input.
Magnetometer subchip SPI chip select. Adafruit states it is level shifted for 3-5V logic input.
Accelerometer and gyro subchip SPI MISO output.
Magnetometer subchip SPI MISO output.
Gyro dynamic enable/disable breakout pin. Adafruit notes the chip documentation is limited for this pin.
Interrupt output from the accelerometer/gyro subchip.
Interrupt output from the accelerometer/gyro subchip.
Accelerometer/gyro data-ready output.
Interrupt output from the magnetometer subchip.
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| Vin | power | Power input to the breakout. Adafruit Learn states the onboard regulator accepts 3-5VDC and safely converts it down for the 3V sensor. | 3-5VDC input | |
| 3V3 | power | 3.3V output from the voltage regulator. Adafruit states up to 100mA can be drawn from this pin. | 3.3V output, up to 100mA | |
| GND | ground | Common ground for power and logic. | 0V | |
| SCL | signal | I2C clock pin. Also used as SPI clock. Adafruit states it is level shifted for 3-5V logic and has a 10K pullup. | 3-5V logic input | |
| SDA | signal | I2C data pin. Also used as SPI MOSI. Adafruit states it is level shifted for 3-5V logic and has a 10K pullup. | 3-5V logic input | |
| CSAG | signal | Accelerometer and gyro subchip SPI chip select. Adafruit states it is level shifted for 3-5V logic input. | 3-5V logic input | |
| CSM | signal | Magnetometer subchip SPI chip select. Adafruit states it is level shifted for 3-5V logic input. | 3-5V logic input | |
| SDOAG | signal | Accelerometer and gyro subchip SPI MISO output. | 3V logic output, readable by 5V logic chips per Adafruit | |
| SDOM / DOM | signal | Magnetometer subchip SPI MISO output. | 3V logic output, readable by 5V logic chips per Adafruit | |
| DEN | signal | Gyro dynamic enable/disable breakout pin. Adafruit notes the chip documentation is limited for this pin. | ||
| INT1 | signal | Interrupt output from the accelerometer/gyro subchip. | 3V logic output | |
| INT2 | signal | Interrupt output from the accelerometer/gyro subchip. | 3V logic output | |
| DRDY | signal | Accelerometer/gyro data-ready output. | 3V logic output | |
| INTM | signal | Interrupt output from the magnetometer subchip. | 3V logic output |