USB-to-serial converter breakout using the CH9102F chip, a near pin-compatible alternative to the CP2102N for UART-to-USB bridging.
USB-to-serial converter breakout using the CH9102F chip, a near pin-compatible alternative to the CP2102N for UART-to-USB bridging.
Ground pin on the FTDI-like 6-pin edge header, visible on the Adafruit product image silkscreen.
Clear-to-send flow-control pin on the FTDI-like edge header; Adafruit notes CTS is the only flow-control pin not supported by the built-in Linux kernel driver.
Power wire on the FTDI-like edge header; Adafruit states the power wire is +5V.
Serial transmit output on the FTDI-like edge header, visible on the Adafruit product image silkscreen.
Serial receive input on the FTDI-like edge header, visible on the Adafruit product image silkscreen.
Request-to-send / auto-reset control pin; Adafruit states the 6th pin is RTS and the board matches its FTDI cables by default.
Modem-control pin available on the side header; Adafruit states the side header includes modem control pins such as DTR, RI and DSR.
Ring-indicator modem-control pin available on the side header per Adafruit product-page modem-control-pin description.
Data-set-ready modem-control pin available on the side header per Adafruit product-page modem-control-pin description.
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| GND | 1 | ground | Ground pin on the FTDI-like 6-pin edge header, visible on the Adafruit product image silkscreen. | 0V |
| CTS | 2 | control | Clear-to-send flow-control pin on the FTDI-like edge header; Adafruit notes CTS is the only flow-control pin not supported by the built-in Linux kernel driver. | 3.3V signal level, 5V compliant per Adafruit product page |
| 5V | 3 | power | Power wire on the FTDI-like edge header; Adafruit states the power wire is +5V. | +5V |
| TXO | 4 | signal | Serial transmit output on the FTDI-like edge header, visible on the Adafruit product image silkscreen. |
ADS1115/MCP3421 ADCs, MCP4725 and GP8413 DACs, CP2102 USB-UART boards, and I2C plumbing like the LTC4316 address shifter — matched to bus, resolution and signal range.
CP2102 USB UART Board (mini) visual previewCP2102 USB UART Board (mini)
FT232 USB UART Board (mini) visual previewFT232 USB UART Board (mini)
10-bit ADC (SPI) visual preview10-bit ADC (SPI)
2-Channel RS232 Module for Raspberry Pi Pico visual preview2-Channel RS232 Module for Raspberry Pi Pico
4-Ch USB 3.2 Gen1 Hub (USB3.2-Gen1-HUB-4U) visual preview4-Ch USB 3.2 Gen1 Hub (USB3.2-Gen1-HUB-4U)
6-in-1 USB to Serial Converter visual preview6-in-1 USB to Serial Converter
Adafruit AD5693R 16-Bit I2C DAC Breakout visual previewAdafruit AD5693R 16-Bit I2C DAC Breakout
Adafruit ADS122C04 24-Bit ADC - STEMMA QT / Qwiic visual previewAdafruit ADS122C04 24-Bit ADC - STEMMA QT / Qwiic
Adafruit AW9523 GPIO Expander and LED Driver Breakout visual previewAdafruit AW9523 GPIO Expander and LED Driver Breakout
Adafruit CAN Pal - CAN Bus Transceiver visual previewAdafruit CAN Pal - CAN Bus Transceiver
Adafruit DAC6578 Breakout - 8-Channel 10-bit I2C DAC visual previewAdafruit DAC6578 Breakout - 8-Channel 10-bit I2C DAC
Adafruit DAC7578 Breakout - 8-Channel 12-bit I2C DAC visual previewAdafruit DAC7578 Breakout - 8-Channel 12-bit I2C DAC
10W Super Bright LED - Violet visual preview
10W Super Bright LED - Warm White visual preview
3-Pin LED Strip Connector Cable - Single Head (5PCS) visual preview
3-Pin LED Strip Connector Cable (5PCS) visual previewWS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.
Components · Addressable LEDs · 176 parts
18-Channel 8-bit PWM LED Driver w/ I2C Interface visual preview
24LC256 I/P I2C EEPROM PDIP-8 visual preview24LC256 P DIP-8 visual preview
4N25 DIP-6 visual preview74HC logic gates, MCP3008/MCP23017 ADCs and expanders, 24LC256 EEPROM, 4N25-series optocouplers and ULN2803A drivers — bare DIP chips with no breakout-board conveniences like pull-ups or level shifting.
Components · Integrated circuits · 68 parts
256MB Micro SD Memory Card visual preview
25LC256 256 Kbit SPI EEPROM visual preview
64 Mbit Serial Pseudo SRAM - PSRAM - 3.3V 133 MHz visual preview
8GB Class 10 SD/MicroSD Memory Card - SD Adapter Included visual preview24LC32/25LC256 EEPROM, I2C FRAM, 64Mbit PSRAM, and microSD breakouts up to 64GB — matched to write frequency and data volume, not just interface.
Components · Memory & storage · 39 parts
1/4W Resistor Pack - 400 PCS visual preview
1N4001 Diode - 10 pack visual preview
1N4007 Diode visual preview
1N4148 General Purpose Fast Switching Diode visual previewE12 resistor kits, ceramic and electrolytic capacitor sets, 1N4148/1N4007 diodes, TIP120 Darlingtons, IRLZ44N MOSFETs and 100F supercapacitors — bench stock in kit quantities.
Components · Passives · 56 parts
| 3.3V signal level, 5V compliant per Adafruit product page |
| RXI | 5 | signal | Serial receive input on the FTDI-like edge header, visible on the Adafruit product image silkscreen. | 3.3V signal level, 5V compliant per Adafruit product page |
| RTS | 6 | control | Request-to-send / auto-reset control pin; Adafruit states the 6th pin is RTS and the board matches its FTDI cables by default. | 3.3V signal level, 5V compliant per Adafruit product page |
| DTR | control | Modem-control pin available on the side header; Adafruit states the side header includes modem control pins such as DTR, RI and DSR. | 3.3V signal level, 5V compliant per Adafruit product page |
| RI | control | Ring-indicator modem-control pin available on the side header per Adafruit product-page modem-control-pin description. | 3.3V signal level, 5V compliant per Adafruit product page |
| DSR | control | Data-set-ready modem-control pin available on the side header per Adafruit product-page modem-control-pin description. | 3.3V signal level, 5V compliant per Adafruit product page |