NeoPixel LED Outdoor Netting - 20 x 20 LEDs - 1x1 Meter Sizing

This ready-to-go NeoPixel LED Outdoor Netting will make it easy to make large grids easy without having to piece together multiple LED strips. It looks like a 20 x 20 RGB LED grid, but requires only a single pin for drawing to the entire 400-point display.

+5V
NeoPixel net positive power input. Product page identifies the item as SK6812/WS2812/NeoPixel LEDs; Adafruit NeoPixel guide states extra/input wires correspond to +5V, ground and data, and that 5V DC power is the normal supply.
Type · powerVoltage · 5V DC typical for NeoPixel power; product page states 5V logic-level data for this netting.
GND
Common ground / negative power return. Adafruit guide says ground must be connected before anything else and shared with the controller/power supply.
Type · groundVoltage · 0V reference
DIN / DI
Data input at the input end of the NeoPixel net. Product page states the net accepts classic SK6812/WS2812/NeoPixel data at 5V logic level; Adafruit guide says the input end is labelled DIN or DI and data moves in one direction.
Type · signalVoltage · 5V logic level stated on the product page; 3.3V may work per product wording but is not guaranteed.
DOUT / DO
Data output at the far end of a NeoPixel chain for chaining additional pixels; Adafruit guide says DOUT/DO can be left disconnected or connected to the next chain data input.
Type · signalVoltage · NeoPixel chain data output, logic follows powered pixel chain.

Start wiring

I2S · SPI · 5V DC typical for NeoPixel power; product page states 5V logic-level data for this netting. · 0V reference

Verify supply voltage and logic levels before powering up.

Module pins: +5V, GND, DIN / DI, DOUT / DO. Schematik maps them to your board in the app.

Related groups

4 groups

Displays

Character LCDs, SPI TFTs, e-paper modules and larger capacitive-touch TFT panels solve different display jobs. Treat display class, interface, controller, resolution, touch, refresh behaviour, storage, voltage and mounting as separate swap checks.

Displays · TFT & LCD displays · 35 parts

Connectors

Sort passive connector adapters from Qwiic boards, LCD modules and microSD card adapters before assuming anything with the right plug will substitute safely.

Connectors & cables · Connectors · 28 parts

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts

MCUs and boards

ESP32, Arduino Uno, Raspberry Pi Pico, and compatible add-on boards for running builds.

Boards · Microcontroller boards · 25 parts