Micro Switch w/Lever - 2 Terminal

Micro-switches are often found in arcade buttons and joysticks but they're also really handy in any kind of mechatronics project or when you need a basic sensor.

Terminal 1
One of the two normally-open microswitch contact terminals; Adafruit states the two terminals short together when actuated.
Type · switch contactVoltage · Recommended use up to 30VDC, 250mA max per Adafruit product page.
Terminal 2
Other normally-open microswitch contact terminal; normally not connected to Terminal 1 until the lever is pressed.
Type · switch contactVoltage · Recommended use up to 30VDC, 250mA max per Adafruit product page.

Pin	Position	Type	Function	Voltage
Terminal 1		switch contact	One of the two normally-open microswitch contact terminals; Adafruit states the two terminals short together when actuated.	Recommended use up to 30VDC, 250mA max per Adafruit product page.
Terminal 2

Start wiring

SPI · Recommended use up to 30VDC, 250mA max per Adafruit product page.

Verify supply voltage and logic levels before powering up.

Related groups

4 groups

Connectors

Sort passive connector adapters from Qwiic boards, LCD modules and microSD card adapters before assuming anything with the right plug will substitute safely.

Connectors & cables · Connectors · 28 parts

Displays

Character LCDs, SPI TFTs, e-paper modules and larger capacitive-touch TFT panels solve different display jobs. Treat display class, interface, controller, resolution, touch, refresh behaviour, storage, voltage and mounting as separate swap checks.

Displays · TFT & LCD displays · 35 parts

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts