M5Stack CO2 Unit with Temperature and Humidity Sensor (SCD40)

M5Stack CO2 Unit with Temperature and Humidity Sensor (SCD40) — M5Stack — co2-unit-with-temperature-and-humidity-sensor-scd40

M5Stack Grove unit based on the Sensirion SCD40 photoacoustic CO2 sensor, measuring CO2 (400–2000 ppm, ±(50 ppm + 5% of reading)), temperature, and humidity over I2C at address 0x62. Onboard 5V-to-3.3V converter; HY2.0 Grove connector.

Pinout

Logical pinout · physical placement not verified
M5STACK CO2 UNIT WITH GNDSDA5VSCL
  • GNDHY2.0-4P PORT.A black wire

    Ground

    Type · GroundVoltage · 0V
  • 5VHY2.0-4P PORT.A red wire

    Power input to unit

    Type · PowerVoltage · 5V
  • SDAHY2.0-4P PORT.A yellow wire

    I2C data, SCD40 address 0x62

    Type · I2C
  • SCLHY2.0-4P PORT.A white wire

    I2C clock

    Type · I2C

Start wiring

I2C · Analog · UART · 3.3 – 5 V · Breakout

Waveshare lists MQ-2 for combustible gases and smoke, MQ-3 for alcohol, and MQ-135 for mixed indoor pollutants such as NH3, NOx, alcohol,…

Module pins: GND, 5V, SDA, SCL. Schematik maps them to your board in the app.

Air quality

105 other options

MQ gas sensors, VOC/eCO2 indicators, NDIR true-CO2 modules and PM1/PM2.5/PM10 particulate sensors — over 100 listings across very different detection chemistries.

View all 105

Related groups

4 groups