Xbee USB Adapter (FTDI Ready)

Xbee USB Adapter (FTDI Ready) — DFRobot — DFR0050

XBee module carrier with an FTDI232 USB-UART chip and Micro USB connector for configuring XBee modules or wirelessly programming FTDI-compatible Arduino variants (FIO, Pro Mini, LilyPad). Powered at 5 V from USB.

Pinout

Logical pinout · physical placement not verified
XBEE USB ADAPTER (FTDI5VRXD3.3VDTRGNDRTSTXD
  • 5V
    Type · Power
  • 3.3V
    Type · Power
  • GND
    Type · Ground
  • TXD
    Type · UART
  • RXD
    Type · UART
  • DTR
    Type · Control
  • RTS
    Type · UART

Start wiring

UART · SPI · 3.3 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: 5V, 3.3V, GND, TXD, RXD. Schematik maps them to your board in the app.

LoRa & RF

93 other options

RFM95W and SX1262 LoRa transceivers, Wio-E5 LoRaWAN modules, SX1302 gateways, Digi XBee mesh radios, 433 MHz ASK serial links, Dragino IoT sensor nodes, and the SDRplay RSP2 wideband SDR receiver.

View all 93

Related groups

4 groups