FireBeetle Covers OLED 128x64 Display
FireBeetle cover board with a 128x64 OLED display, multi-language font chip, and 3-axis accelerometer. Compatible with Arduino and MicroPython; designed for low-power IoT use.
FireBeetle cover board with a 128x64 OLED display, multi-language font chip, and 3-axis accelerometer. Compatible with Arduino and MicroPython; designed for low-power IoT use.
| Pin | Position | Type |
|---|---|---|
| VCC | 1 | Power |
| GND | 2 | Ground |
| SDA | 3 | I2C |
| SCL | 4 | I2C |
| D3 | 5 | GPIO |
| D8 | 6 | GPIO |
| A0 | 7 | Analog |
I2C · SPI · 3.3 – 5 V · Breakout
Confirm the data interface matches your host board.
Module pins: VCC, GND, SDA, SCL, D3, D8, A0. Schematik maps them to your board in the app.
About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.
0.49inch OLED Display Module, 64×32, I2C visual preview0.49inch OLED Display Module, 64×32, I2C
0.91" OLED Display Module - 128x32, I2C visual preview0.91" OLED Display Module - 128x32, I2C
0.96" OLED (B) - SPI/I2C visual preview0.96" OLED (B) - SPI/I2C
0.96" RGB OLED Display Module - 64x128, SPI, 65K Colors visual preview0.96" RGB OLED Display Module - 64x128, SPI, 65K Colors
1.3inch OLED (A), SPI/I2C, Curved Pinheader visual preview1.3inch OLED (A), SPI/I2C, Curved Pinheader
1.3inch OLED (B), SPI/I2C, Straight Pinheader visual preview1.3inch OLED (B), SPI/I2C, Straight Pinheader
1.3inch OLED HAT for Raspberry Pi, 128×64, SPI/I2C visual preview1.3inch OLED HAT for Raspberry Pi, 128×64, SPI/I2C
1.3inch OLED Module (C), 64×128, SPI/I2C visual preview1.3inch OLED Module (C), 64×128, SPI/I2C
1.51inch Transparent OLED, 128×64, SPI/I2C visual preview1.51inch Transparent OLED, 128×64, SPI/I2C
1.5inch OLED Module, 128×128, 16 Grayscale, SPI/I2C visual preview1.5inch OLED Module, 128×128, 16 Grayscale, SPI/I2C
1.5inch RGB OLED Module, 128×128, 65K RGB, SPI visual preview1.5inch RGB OLED Module, 128×128, 65K RGB, SPI
Adafruit 128x64 OLED Bonnet for Raspberry Pi visual previewAdafruit 128x64 OLED Bonnet for Raspberry Pi
0.71" Round LCD Display Module - 160x160, SPI, 65K Colors visual preview16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.
Displays · TFT & LCD displays · 189 parts
1.02" E-Ink Display Module - 128x80, Black/White, SPI visual previewWaveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.
Displays · E-paper displays · 101 parts
"Shake" 8x8 LED Matrix visual previewAdafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.
Displays · LED displays · 89 parts
1.75mm PLA (1kg) - Black visual previewDFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts