
The digital amplifier module is ideal for microcontrollers with I2S audio outputs, supporting various modes and a 2.5W output. Compact and versatile for projects.
Speaker negative / 4Ω/8Ω <3W
Power input / DC 3.3V-5V
Ground /
Not connected pin /
Turn off amplifier, adjust sound channel / Refer to 4.1.2(SD Mode Description)
Analog · I2S
Verify supply voltage and logic levels before powering up.
Module pins: VCC, SPK+, SPK-, GND, GAIN, DIN, BCLK, LRC. Schematik maps them to your board in the app.
SparkFun Qwiic Pro Micro BoogieBoard visual preview
9V to Barrel Jack Adapter visual preview
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic) visual preview
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter | Kiwi Electronics visual previewSort passive connector adapters from Qwiic boards, LCD modules and microSD card adapters before assuming anything with the right plug will substitute safely.
Connectors & cables · Connectors · 28 parts
RGB backlight positive LCD 16x2 visual preview
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic) visual preview
I2C 20x4 Arduino LCD Display Module visual preview
Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display V2.0 visual previewCharacter LCDs, SPI TFTs, e-paper modules and larger capacitive-touch TFT panels solve different display jobs. Treat display class, interface, controller, resolution, touch, refresh behaviour, storage, voltage and mounting as separate swap checks.
Displays · TFT & LCD displays · 33 parts
MQ-2 Gas Sensor visual preview
MQ-3 Gas Sensor visual preview
MQ-135 Gas Sensor visual preview
Grove - Air quality sensor visual previewChoose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.
Sensors · Gas & air-quality sensors · 29 parts
Arduino Uno visual preview
Raspberry Pi Pico visual preview
Adafruit Feather nRF52840 Express visual preview
Pan-Tilt HAT kit visual previewESP32, Arduino Uno, Raspberry Pi Pico, and compatible add-on boards for running builds.
Boards · Microcontroller boards · 24 parts
Adjust amplifier gain / Default to 9dB/Refer to 4.1.1 Gain Control Description
Speaker positive / 4Ω/8Ω <3W
Digital input signal /
Bit clock input / Bit Clock Input
Frame clock / Left/right clock of I2S and LJ mode. Synchronized clock in TDM mode
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| SPK- | Official table 4 row 1 | ground | Speaker negative / 4Ω/8Ω <3W | |
| VCC | Official table 4 row 2 | power | Power input / DC 3.3V-5V | |
| GND | Official table 4 row 3 | ground | Ground / | |
| NC | Official table 4 row 4 | pin | Not connected pin / | |
| SD | Official table 4 row 5 | digital io | Turn off amplifier, adjust sound channel / Refer to 4.1.2(SD Mode Description) | |
| GAIN | Official table 4 row 6 | analog | Adjust amplifier gain / Default to 9dB/Refer to 4.1.1 Gain Control Description | |
| SPK+ | Official table 4 row 7 | power | Speaker positive / 4Ω/8Ω <3W | |
| DIN | Official table 4 row 8 | digital io | Digital input signal / | |
| BCLK | Official table 4 row 9 | digital io | Bit clock input / Bit Clock Input | |
| LRC | Official table 4 row 10 | digital io | Frame clock / Left/right clock of I2S and LJ mode. Synchronized clock in TDM mode |