Name: I2C 16x2 RGB LCD KeyPad HAT with RGB Backlight V2.0
Brand: DFRobot
SKU: DFR0514

5V supply
Board supply for the Raspberry Pi I2C 16x2 RGB LCD KeyPad HAT. DFRobot tech specs state supply voltage 5V.
Type · powerVoltage · 5V
IIC interface
Raspberry Pi IIC/I2C communication interface for the RGB LCD1602 and backlight control. DFRobot states the board uses an IIC interface.
Type · signalVoltage · 3.3V logic
GPIO16 / SelectBCM GPIO16
Select push-button input. DFRobot pinout table maps BCM GPIO 16 to Button Select; jumper must be installed for key use.
Type · signalVoltage · 3.3V logic
GPIO17 / UpBCM GPIO17
Up push-button input. DFRobot pinout table maps BCM GPIO 17 to Button Up; jumper must be installed for key use.
Type · signalVoltage · 3.3V logic
GPIO18 / Down

Start wiring

SPI · I2C · 3.3 V · 3.3 – 5 V · Breakout

Adafruit describes product 398 as a 16x2 RGB backlight LCD using digital pins for LCD control and PWM pins for the backlight; the product…

Module pins: 5V supply, IIC interface, GPIO16 / Select, GPIO17 / Up, GPIO18 / Down, GPIO19 / Left, GPIO20 / Right. Schematik maps them to your board in the app.

TFT & LCD

186 other options

16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.

View all 186

I2C 20x4 Arduino LCD Display Module visual preview

Related groups

4 groups

E-paper

Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.

Displays · E-paper displays · 102 parts

LED displays

Adafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.

Displays · LED displays · 88 parts

OLED

About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.

Displays · OLED displays · 29 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts

Pin	Position	Type	Function	Voltage
5V supply		power	Board supply for the Raspberry Pi I2C 16x2 RGB LCD KeyPad HAT. DFRobot tech specs state supply voltage 5V.	5V
IIC interface		signal	Raspberry Pi IIC/I2C communication interface for the RGB LCD1602 and backlight control. DFRobot states the board uses an IIC interface.	3.3V logic
GPIO16 / Select	BCM GPIO16	signal	Select push-button input. DFRobot pinout table maps BCM GPIO 16 to Button Select; jumper must be installed for key use.	3.3V logic
GPIO17 / Up	BCM GPIO17	signal	Up push-button input. DFRobot pinout table maps BCM GPIO 17 to Button Up; jumper must be installed for key use.	3.3V logic
GPIO18 / Down	BCM GPIO18	signal	Down push-button input. DFRobot pinout table maps BCM GPIO 18 to Button Down; jumper must be installed for key use.	3.3V logic
GPIO19 / Left	BCM GPIO19	signal	Left push-button input. DFRobot pinout table maps BCM GPIO 19 to Button Left; jumper must be installed for key use.	3.3V logic
GPIO20 / Right	BCM GPIO20	signal	Right push-button input. DFRobot pinout table maps BCM GPIO 20 to Button Right; jumper must be installed for key use.	3.3V logic

Pinout

Start wiring

E-paper

LED displays

OLED

3D printing