Gravity: 4-Digital LED Segment Display Module (Green)
4-digit 8-segment green LED display module with I2C interface, 8-level brightness control, and 5V operation under 55 mA.
Start wiring
SPI · I2C · 3.3 V · 3.3 – 5 V · Breakout
Adafruit describes product 398 as a 16x2 RGB backlight LCD using digital pins for LCD control and PWM pins for the backlight; the product…
TFT & LCD
186 other options16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.
Related groups
4 groups
1.02" E-Ink Display Module - 128x80, Black/White, SPI visual preview
1.02" E-Ink Raw Display Panel - 128x80, Black/White, SPI visual preview
1.54inch e-Paper Module (B), 200×200, 3-Color, SPI visual preview
1.54inch e-Paper Module, 200×200, SPI visual previewE-paper
Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.
Displays · E-paper displays · 102 parts
"Shake" 8x8 LED Matrix visual preview
10-Segment LED Bar Graph - Red visual preview
11x1 VFD Display Module visual preview
11x7 LED Matrix Breakout visual previewLED displays
Adafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.
Displays · LED displays · 88 parts
0.49inch OLED Display Module, 64×32, I2C visual preview
0.91" OLED Display Module - 128x32, I2C visual preview
0.96" OLED (B) - SPI/I2C visual preview
0.96" RGB OLED Display Module - 64x128, SPI, 65K Colors visual previewOLED
About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.
Displays · OLED displays · 29 parts
1.75mm PLA (1kg) - Black visual preview
1.75mm PLA (1kg) - Gold visual preview
1.75mm PLA (1kg) - Green visual preview
1.75mm PLA (1kg) - Natural visual preview3D printing
DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts
