Adafruit Feather 32u4 Adalogger

Feather-format ATmega32u4 board (8 MHz, 3.3V) with an onboard microSD card holder, native USB, 100mA LiPo charger, 20 GPIO pins, and hardware I2C/SPI/UART. MicroSD and battery not included.

Pinout

Logical pinout · physical placement not verified
ADAFRUIT FEATHER 32U4 GND#13BATA0USBA1ENA23VA3#0RXA4#1TXA5#2SDASCK#3SCLMOSI#5MISO#6#4#9#7#10#8#11RSTARef#12

6 grouped source records are expanded into separate logical pads where unambiguous; physical placement is not implied.

  • GND
    Type · GroundVoltage · 0V
  • BAT
    Type · PowerVoltage · battery voltage
  • USB
    Type · USBVoltage · USB 5V
  • EN
    Type · ControlVoltage · active low
  • 3V
    Type · PowerVoltage · 3.3V, 500mA peak
  • #0 RX#1 TX
    Type · UARTVoltage · 3.3V logic
  • #2 SDA#3 SCL
    Type · I2CVoltage · 3.3V logic
  • #5#6#9#10#11#12#13
    Type · GPIOVoltage · 3.3V logic
  • A0-A5
    Type · AnalogVoltage · 3.3V max
  • SCKMOSIMISO
    Type · SPIVoltage · 3.3V logic
  • #4#7#8
    Type · USBVoltage · 3.3V logic
  • RSTARef
    Type · Analog, ControlVoltage · up to 3.3V

Start wiring

USB · 3.3 V

Confirm the data interface matches your host board.

Module pins: USB, GND, #5/#6/#9/#10/#11/#12/#13, SCK/MOSI/MISO. Schematik maps them to your board in the app.

Other MCUs

228 other options

Specialists: Teensy for high-clock audio and USB, Adafruit SAMD boards running CircuitPython or the Arduino IDE, proper STM32 eval kits, and the micro:bit classroom ecosystem. Schematik builds target ESP32, Arduino Uno, and Pico; come here when you have a specific reason to.

View all 228

Related groups

4 groups