MICS6814 3-in-1 Gas Sensor Breakout (CO, NO2, NH3)

MICS6814 3-in-1 Gas Sensor Breakout (CO, NO2, NH3) — Pimoroni — PIM569
Availability
In stock

Pimoroni breakout for the MICS6814 multi-gas sensor detecting CO, NO2, and NH3 simultaneously using three independent metal-oxide sensing elements. Requires a warm-up period before readings are valid.

Pinout

Logical pinout · physical placement not verified
MICS6814 3-IN-1 GAS SE3V3GPIO4SDAGNDSCL
  • 3V31x5 header, Raspberry Pi physical pin 1

    Raspberry Pi 3.3V power rail; breakout accepts 3V to 5V

    Type · PowerVoltage · 3V to 5V compatible
  • SDA1x5 header, Raspberry Pi physical pin 3

    I2C data; default I2C address 0x19

    Type · I2CVoltage · I2C logic
  • SCL1x5 header, Raspberry Pi physical pin 5

    I2C clock

    Type · I2CVoltage · I2C logic
  • GPIO41x5 header, Raspberry Pi physical pin 7

    Auxiliary Breakout Garden/Raspberry Pi compatible signal position

    Type · GPIOVoltage · logic level
  • GND1x5 header, Raspberry Pi physical pin 9

    Ground

    Type · GroundVoltage · 0V

Start wiring

I2C · Analog · UART · 3.3 – 5 V · Breakout

Waveshare lists MQ-2 for combustible gases and smoke, MQ-3 for alcohol, and MQ-135 for mixed indoor pollutants such as NH3, NOx, alcohol,…

Module pins: 3V3, GND, SDA, SCL, GPIO4. Schematik maps them to your board in the app.

Air quality

105 other options

MQ gas sensors, VOC/eCO2 indicators, NDIR true-CO2 modules and PM1/PM2.5/PM10 particulate sensors — over 100 listings across very different detection chemistries.

View all 105

Related groups

4 groups