Peltier Thermo-Electric Cooler Module - 5V 1A

Peltier Thermo-Electric Cooler Module - 5V 1A — Adafruit — 1331

Thermoelectric Peltier module rated for 5V, 5W max. One side cools while the other heats; requires active heat dissipation on the hot side. Note: observed draw may reach ~1.5A at 5V, so a 5V/2A supply is recommended.

Pinout

Logical pinout · physical placement not verified
PELTIER THERMO-ELECTRIRed wire (+)Black wire (-)
  • Red wire (+)red lead

    Positive power lead. Adafruit states to apply 5V to the red positive wire; one side gets cold and the other side gets hot.

    Type · PowerVoltage · 5V input, 1A module rating
  • Black wire (-)black lead

    Negative/return lead. Adafruit states to apply 5V to the red positive and black negative wires.

    Type · GroundVoltage · 0V return

Workbench essentials

82 other options

Peltier TEC modules, heatsinks for Raspberry Pi and Jetson boards, PTC heaters, laser diodes, LilyPad sewable LEDs, conductive stainless thread, nOOds LED filaments, and thermal paper rolls.

View all 82

Related groups

4 groups