
Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?)
Raspberry Pi HAT 3.3V power rail; Pinout.xyz says Touch pHAT needs 3v3 power.
Raspberry Pi HAT 5V power rail; Pinout.xyz says Touch pHAT needs 5v power.
Raspberry Pi HAT ground reference on the 40-pin header.
I2C data line; Pinout.xyz lists communication over I2C and Raspberry Pi GPIO 2 as I2C1 SDA.
I2C · I2S · SPI · 3.3V · 5V
Confirm the data interface matches your host board.
Module pins: 3V3, 5V, GND, SDA / GPIO2, SCL / GPIO3. Schematik maps them to your board in the app.
SparkFun Qwiic Pro Micro BoogieBoard visual preview
9V to Barrel Jack Adapter visual preview
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic) visual preview
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter | Kiwi Electronics visual previewSort passive connector adapters from Qwiic boards, LCD modules and microSD card adapters before assuming anything with the right plug will substitute safely.
Connectors & cables · Connectors · 28 parts
RGB backlight positive LCD 16x2 visual preview
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic) visual preview
I2C 20x4 Arduino LCD Display Module visual preview
Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display V2.0 visual previewCharacter LCDs, SPI TFTs, e-paper modules and larger capacitive-touch TFT panels solve different display jobs. Treat display class, interface, controller, resolution, touch, refresh behaviour, storage, voltage and mounting as separate swap checks.
Displays · TFT & LCD displays · 33 parts
MQ-2 Gas Sensor visual preview
MQ-3 Gas Sensor visual preview
MQ-135 Gas Sensor visual preview
Grove - Air quality sensor visual previewChoose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.
Sensors · Gas & air-quality sensors · 29 parts
Arduino Uno visual preview
Raspberry Pi Pico visual preview
Adafruit Feather nRF52840 Express visual preview
Pan-Tilt HAT kit visual previewESP32, Arduino Uno, Raspberry Pi Pico, and compatible add-on boards for running builds.
Boards · Microcontroller boards · 24 parts
I2C clock line; Pinout.xyz lists communication over I2C and Raspberry Pi GPIO 3 as I2C1 SCL.
Touch pHAT uses the CAP1166 capacitive touch and LED driver at I2C address 0x2c according to Pinout.xyz.
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| 3V3 | Raspberry Pi GPIO physical pin 1 / 17 | power | Raspberry Pi HAT 3.3V power rail; Pinout.xyz says Touch pHAT needs 3v3 power. | 3.3V |
| 5V | Raspberry Pi GPIO physical pin 2 / 4 | power | Raspberry Pi HAT 5V power rail; Pinout.xyz says Touch pHAT needs 5v power. | 5V |
| GND | Raspberry Pi GPIO ground pins, including physical pin 6 | ground | Raspberry Pi HAT ground reference on the 40-pin header. | 0V |
| SDA / GPIO2 | Raspberry Pi GPIO physical pin 3 | i2c | I2C data line; Pinout.xyz lists communication over I2C and Raspberry Pi GPIO 2 as I2C1 SDA. | 3.3V logic |
| SCL / GPIO3 | Raspberry Pi GPIO physical pin 5 | i2c | I2C clock line; Pinout.xyz lists communication over I2C and Raspberry Pi GPIO 3 as I2C1 SCL. | 3.3V logic |
| CAP1166 I2C address 0x2c | On-board I2C device, not a separate external header pin | interface | Touch pHAT uses the CAP1166 capacitive touch and LED driver at I2C address 0x2c according to Pinout.xyz. | 3.3V I2C logic |