Gravity: Laser PM2.5 Air Quality Sensor

Gravity: Laser PM2.5 Air Quality Sensor, DFRobot, SEN0177

Laser particle sensor measures particulate concentration for particles from 0.3 to 10 microns and outputs data digitally. Suitable for indoor and outdoor air quality monitoring.

Pinout

Logical pinout ยท physical placement not verified
GRAVITY: LASER PM2.5 APin 1Pin 5Pin 2Pin 6Pin 3Pin 78Pin 4
  • Pin 1Official table 2 row 1

    VCC / Positive Power

    Type ยท Power
  • Pin 2Official table 2 row 2

    GND / Negative Power

    Type ยท Ground
  • Pin 3Official table 2 row 3

    SET / Mode setting (More hereof later)

    Type ยท Unknown
  • Pin 4Official table 2 row 4

    RXD / receive serial port pin (3.3V level)

    Type ยท Power
  • Pin 5Official table 2 row 5

    TXD / Transferring serial port pin (3.3V level)

    Type ยท Power
  • Pin 6Official table 2 row 6

    RESET / Reset

    Type ยท GPIO
  • Pin 78Official table 2 row 7

    NC / NUll

    Type ยท Unknown

Start wiring

I2C ยท Analog ยท UART ยท 3.3 โ€“ 5 V ยท Breakout

Waveshare lists MQ-2 for combustible gases and smoke, MQ-3 for alcohol, and MQ-135 for mixed indoor pollutants such as NH3, NOx, alcohol,โ€ฆ

Module pins: Pin 1, Pin 4, Pin 5, Pin 2. Schematik maps them to your board in the app.

Air quality

105 other options

MQ gas sensors, VOC/eCO2 indicators, NDIR true-CO2 modules and PM1/PM2.5/PM10 particulate sensors โ€” over 100 listings across very different detection chemistries.

View all 105

Related groups

4 groups