Gravity: CCS811 Air Quality Sensor

Gravity: CCS811 Air Quality Sensor — DFRobot — SEN0318

Air quality sensor based on the CCS811 chip measuring eCO2 and TVOC levels. Low power consumption; suited for air purifiers and ventilation control.

Pinout

Logical pinout · physical placement not verified
GRAVITY: CCS811 AIR QU+VCCWAKE-GNDINTCSCLRSTDSDAADDR_SEL3V3
  • +VCCPinout row 1

    Positive supply.

    Type · Power
  • -GNDPinout row 2

    Ground return.

    Type · Ground
  • CSCLPinout row 3

    IIC clock line.

    Type · I2C
  • DSDAPinout row 4

    IIC data line.

    Type · I2C
  • 3V3Pinout row 5

    3.3V pin.

    Type · Power
  • WAKEPinout row 6

    Wake switch pin: awake low, sleep high.

    Type · Control
  • INTPinout row 7

    Interrupt pin, low active.

    Type · GPIO
  • RSTPinout row 8

    Reset pin, low active.

    Type · Control
  • ADDR_SELPinout row 9

    IIC address select.

    Type · GPIO

Start wiring

I2C · Analog · UART · 3.3 – 5 V · Breakout

Waveshare lists MQ-2 for combustible gases and smoke, MQ-3 for alcohol, and MQ-135 for mixed indoor pollutants such as NH3, NOx, alcohol,…

Module pins: +/VCC, 3V3, -/GND, C/SCL, D/SDA. Schematik maps them to your board in the app.

Air quality

105 other options

MQ gas sensors, VOC/eCO2 indicators, NDIR true-CO2 modules and PM1/PM2.5/PM10 particulate sensors — over 100 listings across very different detection chemistries.

View all 105

Related groups

4 groups