Sharp GP2Y0A710K Distance Sensor (100-550cm)

Sharp GP2Y0A710K Distance Sensor (100-550cm) — Sharp — SEN0085

Infrared analog distance sensor with continuous ranging from 1 m to 5.5 m, outputting a voltage inversely proportional to distance. Connects via 5-wire JST connector (dual Vcc, dual GND, single analog out); use a lookup table to convert voltage to distance.

Pinout

Logical pinout · physical placement not verified
SHARP GP2Y0A710K DISTAVCCOUTGND
  • VCC

    Power input for the Sharp GP2Y0A710K sensor. DFRobot states the 5-wire JST interface has dual Vcc lines; power wiring is enough with ground and signal to read the analogue distance voltage.

    Type · Power
  • GND

    Ground return for the sensor. DFRobot states the 5-wire JST interface has dual Gnd lines.

    Type · Ground
  • OUT

    Analogue voltage output representing measured distance. DFRobot states the GP2Y0A710K reports distance as an analogue voltage over roughly 1 m to 5.5 m.

    Type · AnalogVoltage · analogue voltage output; range-to-voltage lookup required

Start wiring

I2C · SPI · Single data line · 3.3 – 5 V · Breakout

Pimoroni describes its VL53L1X breakout as a compact time-of-flight distance sensor with I²C address 0x29, 4–400 cm range, 27° field of v…

Module pins: VCC, GND, OUT. Schematik maps them to your board in the app.

Distance sensors

176 other options

About 180 listings spanning VL53-series ToF breakouts, HC-SR04 and MaxSonar ultrasonics, 360° triangulation LiDARs, IR proximity sensors, 24GHz mmWave presence detection and laser break-beam sensors.

View all 176

Related groups

4 groups