Sharp GP2Y0D805Z0F Digital Distance Sensor with Pololu Carrier

Sharp GP2Y0D805Z0F Digital Distance Sensor with Pololu Carrier — Pololu — 3025

Discontinued; replaced by the Adafruit VL6180X Time of Flight Distance Ranging Sensor (STEMMA QT).

Pinout

Logical pinout · physical placement not verified
SHARP GP2Y0D805Z0F DIGGNDOUTVINENABLE
  • GNDsquare pad

    Square pad on the 0.1 inch three-pin interface; ground for the Pololu carrier with Sharp/Socle GP2Y0D805Z0F digital distance sensor.

    Type · GroundVoltage · 0V reference
  • VINmiddle pad

    Middle pad on the three-pin interface; sensor supply input.

    Type · PowerVoltage · 2.7V to 6.2V per Pololu carrier documentation
  • OUTremaining pad

    Remaining pad on the three-pin interface; digital sensor output, low when an object is detected and high otherwise.

    Type · Signal
  • ENABLEback-side enable pad

    Optional enable input available on the pad labelled enable on the back of the PCB; carrier connects it to Vcc by default so the sensor is always enabled unless the trace is cut.

    Type · ControlVoltage · tied to Vcc by default

Start wiring

I2C · SPI · Single data line · 3.3 – 5 V · Breakout

Pimoroni describes its VL53L1X breakout as a compact time-of-flight distance sensor with I²C address 0x29, 4–400 cm range, 27° field of v…

Module pins: VIN, GND, OUT. Schematik maps them to your board in the app.

Distance sensors

176 other options

About 180 listings spanning VL53-series ToF breakouts, HC-SR04 and MaxSonar ultrasonics, 360° triangulation LiDARs, IR proximity sensors, 24GHz mmWave presence detection and laser break-beam sensors.

View all 176

Related groups

4 groups