Particulate Matter Sensor - SPS30

Particulate Matter Sensor - SPS30 — SparkFun — SEN-15103

Sensirion SPS30 optical particle sensor measuring PM1, PM2.5, PM4, and PM10 mass and number concentrations via I2C or UART. Requires 4.5–5.5 V; rated for >10 years continuous operation with built-in self-cleaning.

Pinout

Logical pinout · physical placement not verified
PARTICULATE MATTER SENVDDSELRXSDAGNDTXSCL
  • VDD5-pin JST ZHR connector pin 1

    Supply voltage

    Type · PowerVoltage · 5V ±10%
  • RXSDA5-pin JST ZHR connector pin 2

    UART receive pin or I2C serial data input/output

    Type · I2C, UARTVoltage · 3.3V/5V compatible logic
  • TXSCL5-pin JST ZHR connector pin 3

    UART transmit pin or I2C serial clock input

    Type · I2C, UARTVoltage · 3.3V/5V compatible logic
  • SEL5-pin JST ZHR connector pin 4

    Interface select; floating selects UART, pull to GND selects I2C

    Type · ControlVoltage · logic select
  • GND5-pin JST ZHR connector pin 5

    Ground; housing internally connected to GND

    Type · GroundVoltage · 0V

Start wiring

I2C · Analog · UART · 3.3 – 5 V · Breakout

Waveshare lists MQ-2 for combustible gases and smoke, MQ-3 for alcohol, and MQ-135 for mixed indoor pollutants such as NH3, NOx, alcohol,…

Module pins: VDD, GND, RX / SDA, TX / SCL. Schematik maps them to your board in the app.

Air quality

105 other options

MQ gas sensors, VOC/eCO2 indicators, NDIR true-CO2 modules and PM1/PM2.5/PM10 particulate sensors — over 100 listings across very different detection chemistries.

View all 105

Related groups

4 groups