TFT LCD Display Module - 2.0" 240x320 (SPI Interface)
2.0" 240x320 IPS TFT display driven by the ST7789 via 4-wire SPI, with 65K color and 8-pin through-hole interface for flexible connector choices.
2.0" 240x320 IPS TFT display driven by the ST7789 via 4-wire SPI, with 65K color and 8-pin through-hole interface for flexible connector choices.
ground
logic/display supply
serial clock
serial data
chip select when present
data/command when present
reset when present
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| GND | 1 | ground | ground | |
| VCC | 2 | power | logic/display supply | |
| SCL/CLK | 3 | spi-or-i2c-clock | serial clock | |
| SDA/DIN | 4 | spi-or-i2c-data | serial data | |
| CS | 5 | spi-cs | chip select when present | |
| DC | 6 | control | data/command when present | |
| RST/RES | 7 | control | reset when present |
SPI · I2C · 3.3 V · 3.3 – 5 V · Breakout
Adafruit describes product 398 as a 16x2 RGB backlight LCD using digital pins for LCD control and PWM pins for the backlight; the product…
Module pins: VCC, GND. Schematik maps them to your board in the app.
16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.
[EOL] M5Stack Cardputer with M5StampS3 v1.1 visual preview[EOL] M5Stack Cardputer with M5StampS3 v1.1
0.71" Round LCD Display Module - 160x160, SPI, 65K Colors visual preview0.71" Round LCD Display Module - 160x160, SPI, 65K Colors
0.71inch Double Eye Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K Colors visual preview0.71inch Double Eye Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K Colors
0.96" IPS LCD Display Module - 160x80, SPI visual preview0.96" IPS LCD Display Module - 160x80, SPI
1.28inch Round Touch LCD Module, 240×240, IPS, SPI/I2C visual preview1.28inch Round Touch LCD Module, 240×240, IPS, SPI/I2C
1.3" SPI Colour Square LCD (240x240) Breakout visual preview1.3" SPI Colour Square LCD (240x240) Breakout
1.3inch LCD Module, 240×240, IPS, SPI visual preview1.3inch LCD Module, 240×240, IPS, SPI
1.44inch LCD HAT for Raspberry Pi, 128×128, SPI visual preview1.44inch LCD HAT for Raspberry Pi, 128×128, SPI
1.54inch LCD Module, 240×240, IPS, 65K RGB, SPI visual preview1.54inch LCD Module, 240×240, IPS, 65K RGB, SPI
1.54inch Touch LCD Module, 240×240, IPS, SPI/I2C visual preview1.54inch Touch LCD Module, 240×240, IPS, SPI/I2C
1.5inch LCD Module, 240×280, IPS, Rounded, SPI visual preview1.5inch LCD Module, 240×280, IPS, Rounded, SPI
1.8" TFT LCD 160x128 RGB visual preview1.8" TFT LCD 160x128 RGB
1.02" E-Ink Display Module - 128x80, Black/White, SPI visual preview
1.02" E-Ink Raw Display Panel - 128x80, Black/White, SPI visual preview
1.54inch e-Paper Module (B), 200×200, 3-Color, SPI visual preview
1.54inch e-Paper Module, 200×200, SPI visual previewWaveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.
Displays · E-paper displays · 101 parts
"Shake" 8x8 LED Matrix visual preview
10-Segment LED Bar Graph - Red visual preview
11x1 VFD Display Module visual preview
11x7 LED Matrix Breakout visual previewAdafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.
Displays · LED displays · 88 parts
0.49inch OLED Display Module, 64×32, I2C visual preview
0.91" OLED Display Module - 128x32, I2C visual preview
0.96" OLED (B) - SPI/I2C visual preview
0.96" RGB OLED Display Module - 64x128, SPI, 65K Colors visual previewAbout 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.
Displays · OLED displays · 29 parts
1.75mm PLA (1kg) - Black visual preview
1.75mm PLA (1kg) - Gold visual preview
1.75mm PLA (1kg) - Green visual preview
1.75mm PLA (1kg) - Natural visual previewDFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts