Adafruit STEMMA Soil Sensor – I2C Capacitive Moisture Sensor

Availability
Out of stock

Adafruit STEMMA capacitive soil moisture sensor using an I2C interface. Operates at 3.3V or 5V. Reports moisture (and optionally temperature) via I2C at default address 0x36. Compatible with ESP32, Arduino, and Raspberry Pi.

Pinout

Logical pinout · physical placement not verified
ADAFRUIT STEMMA SOIL SVCCSDAGNDSCL
  • VCC

    Supply voltage – 3.3V (also accepts 5V); connects to 3.3V rail from AMS1117-3.3V

    Type · PowerVoltage · 3.3
  • GND

    Common ground

    Type · Ground
  • SDA

    I2C data line – connect to ESP32 GPIO21 (SDA)

    Type · I2C
  • SCL

    I2C clock line – connect to ESP32 GPIO22 (SCL)

    Type · I2C

Start wiring

Analog · UART · 3.3 – 5 V · Gravity

Confirm the data interface matches your host board.

Module pins: VCC, GND, SDA, SCL. Schematik maps them to your board in the app.

Soil & liquid

80 other options

Capacitive soil probes, pH/EC/TDS chemistry kits, RS485 water-quality sensors, contact and non-contact level sensors, and turbine flow meters — about 80 listings for anything involving soil or liquid sensing.

View all 80

Related groups

4 groups