Grove - CO2 & Temperature & Humidity Sensor - SCD41

Grove - CO2 & Temperature & Humidity Sensor - SCD41 — Seeed Studio — 101020952

Sensirion SCD41 photoacoustic NDIR sensor measuring CO2, temperature, and humidity simultaneously over I2C via Grove connector. Compact form factor with adjustable power modes for battery-powered deployments.

Pinout

Logical pinout · physical placement not verified
GROVE - CO2 & TEMPERATVCCSDAGNDSCL
  • VCC1

    Grove power input. Seeed SCD41 wiki specifies working voltage 2.4V~5V and direct Grove connection table uses 5V / red wire.

    Type · PowerVoltage · 2.4V~5V working voltage; 5V shown in Seeed direct Grove wiring table
  • GND2

    Ground return for the Grove connector. Seeed direct wiring table lists GND / black wire.

    Type · GroundVoltage · 0V
  • SDA3

    I2C serial data on the Grove connector. Seeed direct wiring table lists SDA / white wire and the page identifies the module as I2C address 0x62.

    Type · I2C
  • SCL4

    I2C serial clock on the Grove connector. Seeed direct wiring table lists SCL / yellow wire.

    Type · I2C

Start wiring

I2C · Analog · UART · 3.3 – 5 V · Breakout

Waveshare lists MQ-2 for combustible gases and smoke, MQ-3 for alcohol, and MQ-135 for mixed indoor pollutants such as NH3, NOx, alcohol,…

Module pins: VCC, GND, SDA, SCL. Schematik maps them to your board in the app.

Air quality

105 other options

MQ gas sensors, VOC/eCO2 indicators, NDIR true-CO2 modules and PM1/PM2.5/PM10 particulate sensors — over 100 listings across very different detection chemistries.

View all 105

Related groups

4 groups