Gravity: GNSS GPS BeiDou Receiver Module - I2C&UART

Gravity: GNSS GPS BeiDou Receiver Module - I2C&UART — DFRobot — TEL0157

Multi-constellation GNSS receiver supporting GPS and BeiDou with I2C and UART interfaces for accurate positioning.

Pinout

Logical pinout · physical placement not verified
GRAVITY: GNSS GPS BEIDDT-CR+
  • DTOfficial table 2 row 1

    I2C data line SDA/UART Data Transmitting- TX

    Type · I2C
  • CROfficial table 2 row 2

    I2C clock line SCL/UART Data Receiving- RX

    Type · Power
  • -Official table 2 row 3

    GND

    Type · Ground
  • +Official table 2 row 4

    VCC

    Type · Power

Start wiring

UART · I2C · USB · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: C/R, +, -, D/T. Schematik maps them to your board in the app.

GNSS & GPS

67 other options

Adafruit Ultimate GPS (PA1616S/PA1616D), NEO-6M and NEO-M9N u-blox breakouts, Gravity GNSS BeiDou boards with I2C/UART, and 4G or LoRa RTK kits — accuracy and constellation requirements split them.

View all 67

Related groups

4 groups