10-digit calculator-style monochrome LCD with decimal and comma segments between each digit. Daylight-readable glass panel with no backlight; requires separate side or top LED lighting for nighttime use.
Power rail on the sold board STEMMA QT / Qwiic I2C connectors; the Adafruit product page states the display PCB connects via STEMMA QT ports and an I2C driver chip.
Ground return on the sold board STEMMA QT / Qwiic I2C connectors.
I2C clock on the sold board STEMMA QT / Qwiic connectors.
I2C data on the sold board STEMMA QT / Qwiic connectors.
| Pin | Type | Function |
|---|---|---|
| STEMMA QTQwiic VCC | Power | Power rail on the sold board STEMMA QT / Qwiic I2C connectors; the Adafruit product page states the display PCB connects via STEMMA QT ports and an I2C driver chip. |
| STEMMA QTQwiic GND | Ground | Ground return on the sold board STEMMA QT / Qwiic I2C connectors. |
| STEMMA QTQwiic SCL | Signal | I2C clock on the sold board STEMMA QT / Qwiic connectors. |
| STEMMA QTQwiic SDA | Signal | I2C data on the sold board STEMMA QT / Qwiic connectors. |
Power rail on the sold board STEMMA QT / Qwiic I2C connectors; the Adafruit product page states the display PCB connects via STEMMA QT ports and an I2C driver chip.
Ground return on the sold board STEMMA QT / Qwiic I2C connectors.
I2C clock on the sold board STEMMA QT / Qwiic connectors.
I2C data on the sold board STEMMA QT / Qwiic connectors.
SPI · I2C · 3.3 V · 3.3 – 5 V · Breakout
Adafruit describes product 398 as a 16x2 RGB backlight LCD using digital pins for LCD control and PWM pins for the backlight; the product…
Module pins: STEMMA QT / Qwiic VCC, STEMMA QT / Qwiic GND, STEMMA QT / Qwiic SCL, STEMMA QT / Qwiic SDA. Schematik maps them to your board in the app.
16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.
0.71" Round LCD Display Module - 160x160, SPI, 65K Colors visual preview0.71" Round LCD Display Module - 160x160, SPI, 65K Colors
0.71inch Double Eye Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K Colors visual preview0.71inch Double Eye Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K Colors
0.96" IPS LCD Display Module - 160x80, SPI visual preview0.96" IPS LCD Display Module - 160x80, SPI
1.28inch Round Touch LCD Module, 240×240, IPS, SPI/I2C visual preview1.28inch Round Touch LCD Module, 240×240, IPS, SPI/I2C
1.3" SPI Colour Square LCD (240x240) Breakout visual preview1.3" SPI Colour Square LCD (240x240) Breakout
1.3inch LCD Module, 240×240, IPS, SPI visual preview1.3inch LCD Module, 240×240, IPS, SPI
1.44inch LCD HAT for Raspberry Pi, 128×128, SPI visual preview1.44inch LCD HAT for Raspberry Pi, 128×128, SPI
1.54inch LCD Module, 240×240, IPS, 65K RGB, SPI visual preview1.54inch LCD Module, 240×240, IPS, 65K RGB, SPI
1.54inch Touch LCD Module, 240×240, IPS, SPI/I2C visual preview1.54inch Touch LCD Module, 240×240, IPS, SPI/I2C
1.5inch LCD Module, 240×280, IPS, Rounded, SPI visual preview1.5inch LCD Module, 240×280, IPS, Rounded, SPI
1.8" TFT LCD 160x128 RGB visual preview1.8" TFT LCD 160x128 RGB
1.83inch Touch LCD Module, 240×284, IPS, SPI/I2C visual preview1.83inch Touch LCD Module, 240×284, IPS, SPI/I2C
1.02" E-Ink Display Module - 128x80, Black/White, SPI visual previewWaveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.
Displays · E-paper displays · 101 parts
"Shake" 8x8 LED Matrix visual previewAdafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.
Displays · LED displays · 89 parts
0.49inch OLED Display Module, 64×32, I2C visual previewAbout 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.
Displays · OLED displays · 30 parts
1.75mm PLA (1kg) - Black visual previewDFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts