96Boards UART Adapter — Seeed Studio — 114990282

USB to UART adapter for 96Boards Consumer and Enterprise Edition boards, using an FTDI FT230X chip. Attaches to the low-speed expansion connector and provides remote power and reset control; bus-powered so it stays connected when the baseboard cycles power.

Pinout

Logical pinout · physical placement not verified
96BOARDS UART ADAPTERVCCTXDGNDRXD
  • VCC
    Type · Power
  • GND
    Type · Ground
  • TXD
    Type · UART
  • RXD
    Type · UART

Start wiring

Ethernet · UART · SPI · Shield

Verify supply voltage and logic levels before powering up.

Module pins: VCC, GND, TXD, RXD. Schematik maps them to your board in the app.

Wired comms

118 other options

W5100/W5500 Ethernet shields, LAN8720 RMII PHY boards, MAX3243 RS-232 level shifters, isolated USB-to-RS485 converters, CAN FD bridges, and passive or active PoE injectors and splitters.

View all 118

Related groups

4 groups