1mm 4-pin Vertical Connector - JST SH Compatible - 10 pack

10-pack of vertical JST SH-compatible 4-pin connectors with 1mm pitch through-hole mounting tabs. Compatible with STEMMA QT and Qwiic I2C cables.

Logical pinout · physical placement not verified

GND1
Ground pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the black wire on matching cables.
Type · Ground
3.3V2
3.3V DC power pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the red wire on matching cables.
Type · PowerVoltage · 3.3VDC
SDA3
I2C SDA data pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the blue wire on matching cables.
Type · I2CVoltage · 3.3V I2C logic in Qwiic/STEMMA QT use
SCL4
I2C SCL clock pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the yellow wire on matching cables.
Type · I2CVoltage · 3.3V I2C logic in Qwiic/STEMMA QT use

Pin	Position	Type	Function	Voltage
GND	1	Ground	Ground pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the black wire on matching cables.
3.3V	2	Power	3.3V DC power pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the red wire on matching cables.	3.3VDC
SDA	3	I2C	I2C SDA data pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the blue wire on matching cables.	3.3V I2C logic in Qwiic/STEMMA QT use
SCL	4	I2C	I2C SCL clock pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the yellow wire on matching cables.	3.3V I2C logic in Qwiic/STEMMA QT use

Logical pinout · physical placement not verified

Pin details

4 connections

GND
Ground pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the black wire on matching cables.
Ground
1
3.3V
3.3V DC power pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the red wire on matching cables.
PowerVoltage · 3.3VDC
2
SDA
I2C SDA data pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the blue wire on matching cables.
I2CVoltage · 3.3V I2C logic in Qwiic/STEMMA QT use
3
SCL
I2C SCL clock pin for Qwiic/STEMMA QT compatible JST SH connector; Adafruit states this is the yellow wire on matching cables.
I2CVoltage · 3.3V I2C logic in Qwiic/STEMMA QT use
4

Cables

260 other options

Around 250 entries: JST SH/PH cable pairs, Grove and STEMMA QT/Qwiic leads, jumper wires, silicone hookup wire from 30 AWG to 8 AWG, and FPC ribbon cables. Ecosystem bridge cables exist for the PH-to-SH pitch mismatch.

View all 260

Related groups

4 groups

Connectors

Passive adapters, 2.54 mm pin headers, terminal blocks, JST and barrel-jack connector pairs, RF antennas and microSD adapters. Mechanical fit between two connectors does not confirm voltage, pinout or protocol compatibility.

Connectors & cables · Connectors · 224 parts

USB and serial

Passive USB cables plus passive USB cables, Micro-B and USB-C breakouts, CP2102 and FT232 USB-UART bridges, DIY cable assembly parts, and USB-C development boards. Data support, host/device role and logic voltage vary significantly across the group.

Connectors & cables · USB cables · 91 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts

LED pixels

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

Components · Addressable LEDs · 180 parts