2.9inch Touch e-Paper HAT for Raspberry Pi, 296×128, SPI
2.9-inch E-Ink HAT for Raspberry Pi with 5-point capacitive touch, 296×128, black/white, SPI interface.
2.9-inch E-Ink HAT for Raspberry Pi with 5-point capacitive touch, 296×128, black/white, SPI interface.
| Pin | Type |
|---|---|
| VCC | Power |
| GND | Ground |
| DIN | Signal |
| CLK | Signal |
| CS | SPI |
| DC | Control |
| ERST | Control |
| BUSY | Signal |
| INT | Signal |
| SCL | I2C |
| SDA | I2C |
| TRST | Control |
| EN | Control |
SPI · I2C · 3.3 V · Bare
Confirm the data interface matches your host board.
Module pins: VCC, GND, DIN, CLK, BUSY, INT, SCL, SDA. Schematik maps them to your board in the app.
Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.
1.02" E-Ink Display Module - 128x80, Black/White, SPI visual preview1.02" E-Ink Display Module - 128x80, Black/White, SPI
1.02" E-Ink Raw Display Panel - 128x80, Black/White, SPI visual preview1.02" E-Ink Raw Display Panel - 128x80, Black/White, SPI
1.54inch e-Paper Module (B), 200×200, 3-Color, SPI visual preview1.54inch e-Paper Module (B), 200×200, 3-Color, SPI
1.54inch e-Paper Module, 200×200, SPI visual preview1.54inch e-Paper Module, 200×200, SPI
1.54inch e-Paper Raw Panel (B), 200×200, 3-Color, SPI visual preview1.54inch e-Paper Raw Panel (B), 200×200, 3-Color, SPI
1.54inch e-Paper Raw Panel, 200×200, SPI visual preview1.54inch e-Paper Raw Panel, 200×200, SPI
1.54inch NFC-Powered e-Paper (BW) visual preview1.54inch NFC-Powered e-Paper (BW)
1.54inch NFC-Powered e-Paper (G), 4-Color visual preview1.54inch NFC-Powered e-Paper (G), 4-Color
1.64inch e-Paper (G) Raw Display, 168×168, 4-Color visual preview1.64inch e-Paper (G) Raw Display, 168×168, 4-Color
1.64inch e-Paper Module (G), 168×168, 4-Color visual preview1.64inch e-Paper Module (G), 168×168, 4-Color
1.9inch Segment e-Paper Module, 91 Segments, I2C visual preview1.9inch Segment e-Paper Module, 91 Segments, I2C
10.3" E-Paper Monitor with HDMI - for Raspberry Pi and Jetson Nano visual preview10.3" E-Paper Monitor with HDMI - for Raspberry Pi and Jetson Nano
0.71" Round LCD Display Module - 160x160, SPI, 65K Colors visual preview16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.
Displays · TFT & LCD displays · 189 parts
"Shake" 8x8 LED Matrix visual previewAdafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.
Displays · LED displays · 89 parts
0.49inch OLED Display Module, 64×32, I2C visual previewAbout 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.
Displays · OLED displays · 30 parts
1.75mm PLA (1kg) - Black visual previewDFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts