EMW3060 Wi-Fi Module — Seeed Studio — 2860

MXCHIP EMW3060 embedded Wi-Fi module with integrated ARM9 MCU running at up to 120 MHz, 802.11b/g/n, 256 KB SRAM and 2 MB Flash, 3.3 V supply. Available in LGA SMT or DIP form factor.

Pinout

Logical pinout · physical placement not verified
EMW3060 WI-FI MODULE3V3UART_RXGNDRSTUART_TXindividual GPIO pads
  • 3V3
    Type · Power
  • GND
    Type · Ground
  • UART_TX
    Type · Signal
  • UART_RX
    Type · Signal
  • RST
    Type · Control
  • individual GPIO pads
    Type · Signal

Start wiring

SPI · UART · Ethernet · 3.3 – 5 V · Breakout

DFRobot describes DFR0174 as an XBee USB Adapter V2 with an Atmega8U2 programmed as a USB-to-serial converter, Micro USB, XBee socket com…

Module pins: 3V3, GND, UART_TX, UART_RX, individual GPIO pads. Schematik maps them to your board in the app.

Networking

25 other options

ESP8285, ATWINC1500, and EMW3060 Wi-Fi modules; the WIZ5500 Ethernet co-processor; the DP83848 RMII PHY board; 802.11n USB adapters for the Pi; and an XBee USB configuration adapter.

View all 25

Related groups

4 groups