Adafruit Wiz5500 Ethernet Co-Processor Breakout Board

Adafruit Wiz5500 Ethernet Co-Processor Breakout Board — Adafruit — 6348
Availability
Out of stock

WIZnet W5500 hardwired TCP/IP Ethernet co-processor breakout with an integrated RJ45 jack, SPI header, status LEDs, reset, interrupt, and mode jumpers. Offloads TCP/IP stack from the host MCU over SPI.

Pinout

Logical pinout · physical placement not verified
ADAFRUIT WIZ5500 ETHERVINMOSI3.3VCSGNDRSTRJ45 Ethernet portIRQSCKM2M1M0 jumpersMISO
  • VIN
    Type · Power
  • 3.3V
    Type · Power
  • GND
    Type · Ground
  • RJ45 Ethernet port
    Type · Unknown
  • SCK
    Type · SPI
  • MISO
    Type · SPI
  • MOSI
    Type · SPI
  • CS
    Type · SPI
  • RST
    Type · Control
  • IRQ
    Type · Unknown
  • M2M1M0 jumpers
    Type · Unknown

Start wiring

SPI · UART · Ethernet · 3.3 – 5 V · Breakout

DFRobot describes DFR0174 as an XBee USB Adapter V2 with an Atmega8U2 programmed as a USB-to-serial converter, Micro USB, XBee socket com…

Module pins: VIN, 3.3V, GND, SCK, MISO, MOSI. Schematik maps them to your board in the app.

Networking

25 other options

ESP8285, ATWINC1500, and EMW3060 Wi-Fi modules; the WIZ5500 Ethernet co-processor; the DP83848 RMII PHY board; 802.11n USB adapters for the Pi; and an XBee USB configuration adapter.

View all 25

Related groups

4 groups