ESP8285 Wi-Fi SoC Module

ESP8285 Wi-Fi SoC Module — Seeed Studio — 2931

Espressif ESP8285 Wi-Fi module with the 802.11b/g/n radio and 1 MB Flash integrated on-chip, 3.3 V supply. Drop-in for ESP8266-based designs where external flash is undesirable.

Pinout

Logical pinout · physical placement not verified
ESP8285 WI-FI SOC MODUVCCGPIO6GNDGPIO7ENGPIO8RSTGPIO9TXDGPIO10RXDGPIO11GPIO0GPIO12GPIO1GPIO13GPIO2GPIO14GPIO3GPIO15GPIO4GPIO16GPIO5ADC

One grouped source record is expanded into separate logical pads where unambiguous; physical placement is not implied.

  • VCC
    Type · Power
  • GND
    Type · Ground
  • EN
    Type · Control
  • RST
    Type · Control
  • TXD
    Type · UART
  • RXD
    Type · UART
  • GPIO0–GPIO16
    Type · Signal
  • ADC
    Type · Analog

Start wiring

SPI · UART · Ethernet · 3.3 – 5 V · Breakout

DFRobot describes DFR0174 as an XBee USB Adapter V2 with an Atmega8U2 programmed as a USB-to-serial converter, Micro USB, XBee socket com…

Module pins: VCC, GND, TXD, RXD, GPIO0–GPIO16, ADC. Schematik maps them to your board in the app.

Networking

25 other options

ESP8285, ATWINC1500, and EMW3060 Wi-Fi modules; the WIZ5500 Ethernet co-processor; the DP83848 RMII PHY board; 802.11n USB adapters for the Pi; and an XBee USB configuration adapter.

View all 25

Related groups

4 groups